Table of Contents
Advertisement
Section 3 - Configuration
MAC Filtering
The Access Control setup tab enables you to configure filters to control
which wireless clients access your network, and which network resources
they can access.
Select Enable to enable the Wireless Access Control Mode. In this
mode, only listed wireless devices will be allowed to connect to the
wireless network.
Click the Add button to add an item to the filter list.
Enter the MAC Address of a device you wish to allow access for to the
WLAN.
Click the Apply button when you are done. This will add
the device's MAC Address to the filter list.
D-Link Wireless AC Dual-Band ADSL Router User Manual
34
Advertisement
Table of Contents
