Add Qos Classification Rules - D-Link GO-DSL-AC750 User Manual

Section 3 - Configuration
Classify Type:
Active:
Application:
Physical Ports:
Destination MAC
address:
Destination IP address:
Destination Subnet
Mask:
Destination Port Range:
Source MAC address:
Source IP address:
Source Subnet Mask:
Source Port Range:
Protocol:
D-Link Wireless AC Dual-Band ADSL Router User Manual

Add QoS Classification Rules

Check to enable or disable the IPv6 Filter.
Select to enable or disable this rule.
Select the pre-defined application type or
choose Not Matched.
Choose the LAN Interface.
Enter the destination MAC address for the
rule. If data packets include the MAC address,
the data packets are placed into the group.
Enter the destination IP address for the rule.
If data packets include the IP address, the
data packets are placed into the group.
Enter the destination subnet mask for the
rule.
Enter the destination port range. (eg. UDP/
TCP port range)
Enter the source MAC address. If data packets
include the MAC address, the data packets
are placed into the group.
Enter the source IP address. If data packets
include the IP address, the data packets are
placed into the group.
Enter the source subnet mask.
Enter the source port range. (eg. UDP/TCP
port range)
Select the pre-defined protocol type or
choose Not Matched.
56