Connect A Wireless Client To Your Router; Wps Button - D-Link GO-DSL-AC750 User Manual

Section 2 - Installation

Connect a Wireless Client to your Router

The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or
a software utility with WPS) that you can press to connect to the GO-DSL-AC750 router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the side of GO-DSL-AC750 for about 1 second. The Internet LED on the front will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
D-Link Wireless AC Dual-Band ADSL Router User Manual

WPS Button

2.4 GHZ WPS Button
5 GHZ WPS Button
12