Related Manuals for D-Link GO-DSL-AC750
Summary of Contents for D-Link GO-DSL-AC750
-
Page 1: User Manual
Version 1.03 | 12/04/2014 User Manual Wireless AC Dual-Band ADSL2+ Modem Router GO-DSL-AC750... -
Page 2: Preface
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description February 24, 2014 • Initial release for Revision A1 1.01... -
Page 3: Table Of Contents
WPS Button ...................12 Port Forwarding ..............44 Port Trigger ................45 Configuration ..............13 DMZ ..................46 Web-based Configuration Utility ..........13 SAMBA ..................47 Setup Wizard ................14 3G WAN Configuration ............48 Manual Configuration .............20 Parental Control ..............49 D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 4 Windows® 7 ...................99 RIPng ..................74 WPA/WPA2 ................99 NAT ...................75 WPS ..................102 FTPD Setting .................76 Windows Vista® ................. 106 FTPD Account ...............77 WPA/WPA2 ................. 107 Management ................78 WPS/WCN 2.0 ..............109 System Management ............78 D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 5 Troubleshooting ............113 Wireless Security ............117 What is WPA? ..............117 Networking Basics ............118 Check your IP address ............118 Statically Assign an IP address ..........119 Link’n Print ..............120 Technical Specifications ..........125 D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 6: Product Overview
Note: Using a power supply with a different voltage rating than the one included with the Wireless AC Dual-Band ADSL2+ Modem Router will cause damage and void the warranty for this product. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 7: System Requirements
Microsoft Internet Explorer® v7, Mozilla® Firefox® v9.0, Google® Chrome 16.0, or Safari® v4 or higher version Windows Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 8: Introduction
Section 1 - Product Overview Introduction The D-Link Wireless AC Dual-Band ADSL2+ Modem Router is a IEEE 802.11ac compliant device that delivers up to 3 times faster speeds than 802.11n while staying backward compatible with 802.11a/g/b devices. Connect the Wireless AC Dual-Band ADSL2+ Modem Router to a Cable or DSL modem and provide high-speed Internet access to multiple computers, game consoles, and media players. -
Page 9: Features
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 10: Leds
Wireless LED A solid light indicates that the wireless networks are ready. WPS LED This LED blinks during WPS handshake phase. USB LED A solid green light indicates a USB is connected. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 11: Back
Insert a paperclip in the hole and wait for several seconds to reset the router to default settings. USB Port Attaches to a USB 2.0 printer or storage device to share with your network. Power Receptor Receptor for the supplied power adapter. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 12: Hardware Overview
Use this button to initiate a WPS connection on the 2.4 GHz band. 5 GHz Wireless Use this button to initiate a WPS connection on the 5 GHz band. Power Use this button to power the device on or off. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 13: Installation
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 14: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. -
Page 15: Wireless Installation Considerations
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. -
Page 16: Installation
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. GO-DSL-AC750 Computer D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 17: Connect A Wireless Client To Your Router
WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the side of GO-DSL-AC750 for about 1 second. The Internet LED on the front will start to blink. -
Page 18: Configuration
Configuration Web-based Configuration Utility This section will show you how to configure your D-Link wireless access point using the web-based configuration utility. If you wish to change the default settings or adjust the configuration of the GO-DSL-AC750 you may use the web- based configuration utility. -
Page 19: Setup Wizard
Setup Wizard Click Setup Wizard to configure your router. If you want to configure the access point manually without running the wizard, skip to “Manual Configuration” on page 20. Click Next to continue. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 20 Time Zone: Select your time zone from the drop down menu. Enable Daylight Saving: Enable or disable daylight saving. Daylight Saving Start/End: Specify the time and date when daylight sav- ing should start/end. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 21 ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 22 It is highly recomended to secure your wireless network. Select from the available options. For more information see “Wireless Security” on page 117. Click Next to continue. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 23 It is highly recomended to secure your wireless network. Select from the available options. For more information see “Wireless Security” on page 117. Click Next to continue. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 24 Click Finish to save your network settings. In order for your network settings to take effect the AP will reboot automatically. When the device has finished rebooting the main screen will display. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 25: Manual Configuration
Setup If you wish to change the default settings or adjust the configuration of the GO-DSL-AC750 you may use the web-based configuration utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter address of the router (http://192.168.1.1). -
Page 26: Internet Setup
PCR, SCR and MBS. Peak Cell Rate: Peak cell rate (PCR) is the maximum rate at which cells can be transmitted along a connection in the ATM network. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 27 VLAN configurations are 4,094 Enable Service: Choose to enable or disable the service. Service Name: Enter a name for the service. Click Apply to save your Internet Setup settings. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 28: 2.4G Wireless
Bandwidth: Use the dropdown menu to select the chan- nel bandwidth. Wireless Channel: Use the dropdown menu to select a wireless channel, or let the router scan automatically. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 29: 2.4G Wireless Security
Wireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed between the router and wireless clients. The GO-DSL-AC750 supports two popular wireless security protocols, you should select a protocol based on the wireless clients which will be accessing your network. -
Page 30: 5G Wireless
Bandwidth: Use the dropdown menu to select the chan- nel bandwidth. Wireless Channel: Use the dropdown menu to select a wireless channel, or let the router scan automatically. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 31: 5G Wireless Security
Wireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed between the router and wireless clients. The GO-DSL-AC750 supports two popular wireless security protocols, you should select a protocol based on the wireless clients which will be accessing your network. -
Page 32: Local Network
Check “Configure the second IP Address and Subnet Mask for LAN” to enable a local alias IP address if required. IP Address: Enter the alias IP address. Subnet Mask: Enter the alias subnet mask. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 33 Specify the conditions for DHCP class han- dling. DHCP Reservations List: Use this option to reserve specific IP Ad- dresses. Number of Dynamic DHCP Dynamic DHCP clients will be listed here with clients: supporting information. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 34: Local Ipv6 Network
Use this option to specify whether IPv6 Prefix delegation is assigned manually or via a WAN interface. WAN Interface: Specify the WAN interface to be used. for IPv6 prefix delegation. Site Prefix: Manually assign an IPv6 prefix delegation. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 35: Time And Date
This information is required to config- ure the time-based options for the router. Enable Daylight Saving: Enable or disable daylight saving. Daylight Saving Start/End: Specify the time and date when daylight sav- ing should start/end. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 36: Advanced
Section 3 - Configuration Advanced 2.4G Advanced Wireless This section enables you to fine tune the wireless settings on the 2.4G wireless band. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 37: Advanced Settings
Enable the wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the GO-DSL-AC750 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wire- less network in order to connect to it. - Page 38 Choose to enable or disable guest wireless user isolation. Disable WMM Advertise: Enable or Disable WiFi MultiMedia QoS on the guest network. Max Clients: Use this option to specify the maximum number of clients on the guest network. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 39: Mac Filtering
Enter the MAC Address of a device you wish to allow access for to the WLAN. Click the Apply button when you are done. This will add the device’s MAC Address to the filter list. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 40: Security Settings
Select a wireless security encryption option. You can also choose to not use one by selecting None, but this is not recommended. For information on wireless security, please refer to “Wireless Security” on page 117. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 41: Wps Settings
Section 3 - Configuration WPS Settings This section allows you to configure how the GO-DSL-AC750 uses Wi-Fi Protected Setup (WPS) to create a secure wireless connection. Select the SSID of the virtual network you wish to configure. Enable WPS: Check the box to enable devices to connect to the router using WPS. -
Page 42: 5G Advanced Wireless
Section 3 - Configuration 5G Advanced Wireless This section enables you to fine tune the wireless settings on the 5G wireless band. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 43: Advanced Settings
Enable the wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the GO-DSL-AC750 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wire- less network in order to connect to it. - Page 44 Choose to enable or disable guest wireless user isolation. Disable WMM Advertise: Enable or Disable WiFi MultiMedia QoS on the guest network. Max Clients: Use this option to specify the maximum number of clients on the guest network. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 45: Mac Filtering
Enter the MAC Address of a device you wish to allow access for to the WLAN. Click the Apply button when you are done. This will add the device’s MAC Address to the filter list. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 46: Security Settings
Select a wireless security encryption option. You can also choose to not use one by selecting None, but this is not recommended. For more information on wireless security, please refer to “Wireless Security” on page 117. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 47: Wps Settings
Section 3 - Configuration WPS Settings This section allows you to configure how the GO-DSL-AC750 uses Wi-Fi Protected Setup (WPS) to create a secure wireless connection. Select the SSID of the virtual network you wish to configure. Enable WPS: Check the box to enable devices to connect to the router using WPS. -
Page 48: Alg
Check to enable or disable H323 pass through functionality. SIP Pass Through: Check to enable or disable SIP pass through functionality. IPSEC Pass Through: Check to enable or disable IPSEC pass through functionality. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 49: Port Forwarding
Enter a name for the server or service. Schedule: Select a schedule for the port to be forward- Server IP Address: Enter the internal IP address for the traffic to be forwarded to. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 50: Port Trigger
Enter the protocol to monitor for to trigger this rule. Open Port Start/End: Enter the starting and ending port to open when the rule is triggered. Open Protocol: Enter the protocol to allow through the opened ports. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 51: Dmz
Internet. WAN Connection: Specify the WAN connection to use. Enable DMZ: Check to enable or disable DMZ functionality. DMZ Host IP Address: Enter an IP address to be inlcuded in the DMZ. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 52: Samba
Re-enter the password for the root user. password: Enable USB Storage: Check to enable or disable SAMBA function- ality for USB devices. Enable Anonymous Check to enable or disable SAMBA function- Access: ality for USB anonymous users. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 53: 3G Wan Configuration
Auto in Reconnect Mode to disable this feature. Period time: Specify a period for DSL or Ethernet uplink to be disconnected. Fail Tolerance: Specify the number of failures before using the backup connection. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 54: Parental Control
The Website Filter enables you to quickly create a list of websites to limit access to, or to block access to. The MAC Filter enables you to filter access by device MAC addresses. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 55: Website Filter
Click Add/Edit/Delete to manage your website list. URL: Enter a website address. Days/All Day/Start - End Use these options to schedule when you Time: want the website filter to be active for the specified URL. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 56: Mac Filter
Enter the users current MAC address. Address: Other MAC Address: Enter the user’s alternate MAC address. Days/All Day/Start - End Enter or Check the options to create the Time: required access control schedule. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 57: Filtering Options
Section 3 - Configuration Filtering Options This section enables you to apply advanced IPv4 or IPv6 filtering options . Click IPv4 Filtering to reveal IPv4 configuration options. Click IPv6 Filtering to reveal IPv4 configuration options. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 58: Ipv4 Filtering
Enter the destination IP address to be fil- tered. Destination Mask: Enter the destination mask to be filtered. Destination Port: Enter the destination port to be filtered. Description: Enter a name for the filter rule. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 59: Ipv6 Filtering
Enter the destination IP address to be fil- tered. Destination Mask: Enter the destination mask to be filtered. Destination Port: Enter the destination port to be filtered. Description: Enter a name for the filter rule. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 60: Qos
If WRR discipline is selected, define it here. Enable DSCP ReMark: Check to enable or disable DSCP ReMark. Enable 802.1p ReMark: Check to enable or disable 802.1p ReMark Click Add a Rule to reveal further QoS configuration options. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 61: Add Qos Classification Rules
Source Subnet Mask: Enter the source subnet mask. Source Port Range: Enter the source port range. (eg. UDP/TCP port range) Protocol: Select the pre-defined protocol type or choose Not Matched. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 62 - carrying SAP data, for instance - down to “loss eligible” traffic. Zero is used as a best- effort default priority, invoked automatically when no other value has been set Queue #: Select Low, Medium, High or Highest. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 63: Anti-Attack Settings
WAN. Check Enable Anti-Attack to reveal the Anti- Attack configuration options. Check Enable Attack Log to record attack attempts to the log file. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 64: Dns
DNS servers on your ISP’s network, select IPv4 static DNS or IPv6 static DNS as appropriate and enter the IP addresses in the available entry fields for the preferred DNS server and the alternate DNS server. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 65: Dynamic Dns
Enter the hostname you registered with the Dynamic DNS provider. Interface: Select the appropriate interface. Username: Enter the username for your Dynamic DNS account. Password: Enter the password for your Dynamic DNS account. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 66: Network Tools
The Network Tools section provides several features which enable a fine degree of network management control. Click the Port Mapping, IGMP Proxy, IGMP Snooping, MLD Configuration, UPnP, DSL, SNMP, or Net USB button to reveal the associated configuration options. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 67: Port Mapping
Select from the listed interfaces from the Available Interface then click the <- arrow button to add them to the Grouped Inter- face list. This creates the required mapping of the ports. The group name must be unique. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 68: Igmp Proxy
Creating an IGMP proxy enables the system to issue IGMP host messages on behalf of hosts that the system has discovered through standard IGMP interfaces. This allows the system to act as a proxy for its hosts after being enabled. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 69: Igmp Snooping
Section 3 - Configuration IGMP Snooping Enabling this option allows the router to listen for internet group management protocol (IGMP) traffic, which can help to detect clients which require multicast streams. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 70: Mld Configuration
Section 3 - Configuration MLD Configuration Multicast Listener Discovery(MLD) snooping allows the switch to examine MLD packets and make forwarding decisions based on their content. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 71: Upnp
Internet requests. Enable UPnP: Check to enable or disable UPnP. WAN Connections: Select from the listed interfaces to work with UPnP. LAN Connections: Select from the listed interfaces to work with UPnP. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 72: Dsl
Section 3 - Configuration This page lets you set the xDSL mode and type. It is recommended that you use the default settings. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 73: Net Usb
Select this option to use the USB port for connecting a USB printer with D-Link Link’n Print. D-Link Link’n Print allows you to share your USB printer as a network printer server to all connected local hosts. Note: Link’n Print Printer Server is a USB... -
Page 74: Routing
The Routing sections provides an advanced method of customizing specific routes of data through your network. Click the Static Route, IPv6 Static Route, Policy Route, RIP Settings, or RIPng Settings button, to reveal the associated configuration options. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 75: Static Routing
Enter the subnet mask of the destination IP address. Use Gateway IP Address: Enter the IP address of the gateway router to be used. Use Interface: Select the interface to be used from the dropdown menu.. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 76: Ipv6 Static Routing
Enter the IPv6 address of the destination Address: router. Use Gateway IP Address: Enter the IPv6 address of the gateway router to be used. Use Interface: Select the interface to be used from the dropdown menu. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 77: Policy Route
Click the Add button to reveal the associated configuration options. WAN Connection: Select the WAN connection to be used for binding. LAN Connection: Select at least one LAN connection to be bound. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 78: Rip
Use this page to select the interfaces on your device that you want to use RIP for, and the version of the protocol to be used. Dynamic Route: Select from OFF, RIPv1, RIPv2. Direction: Select either Active or Passive. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 79: Ripng
Section 3 - Configuration RIPng Use this page to enable or disable RIPng for the available interfaces. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 80: Nat
Select either Single IP or IP Range. Internal IP Address: Enter the IP or the IP Range External IP Type: Select either Single IP or IP Range. External IP Address: Enter the IP or the IP Range D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 81: Ftpd Setting
FTP port. FTP Server: This item displays the FTP server’s status. Enable FTP Server: Select to enable or disable the FTP server. FTP Server Port: Enter a port for the FTP server. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 82: Ftpd Account
User Name, Password, and Rights entered. Refresh: Refresh an existing account in the Account Table. Edit: Edit this account’s information. Click the Modify button after making your changes to save them. Delete: Delete this account. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 83: Management
System Management The System Management sections provides a number of options to manage the Go-DSL-AC750. This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created. -
Page 84: Firmware Update
Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site. -
Page 85: Access Controls
Section 3 - Configuration Access Controls Here, you can manage access to your router. Click the Account Password, LACL, RACL, or IP Address buttons to reveal the associated configuration options. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 86: Account Password
Confirm Password: Re-enter the new password. Web Idle Time Out: Set a period of time to automatically log the user out if the session is inactive for the speci- fied amount of time. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 87: Local Access Control
Enable Local Access: Check to enable or disable remote access to the following services. Choose a connection: Select a connection interface from the avail- able options in the dropdown menu. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 88: Remote Access Control
Remote Access Control The Remote Access connection section enables you to allow or disallow WAN management access. Choose a connection: Select a connection from the dropdown menu on which to enable remote access. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 89: Ip Address
Check Enable Access Control Mode to enable the ACL, then click Add, to reveal further options for adding an IP address to the ACL. IP Address: Enter an IP Address to be added to the ACL. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 90: Diagnosis
Section 3 - Configuration Diagnosis The Diagnosis section provides various method of testing your router and network. Click the DSL Test, Traceroute, or Ping buttons, to reveal the associated configuration options. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 91: Dsl Test
Section 3 - Configuration DSL Test The DSL section provides a way for you to test your DSL connection. WAN Connection: Select the connection from the dropdown menu that you would like to test. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 92: Traceroute
Max TTL: Enter a maximum value for TTL. Wait times: Enter a maximum value for wait times be- tween hops. Result: The results of the traceroute test will be dis- played here. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 93: Ping
Enter a value for the ping packet size. WAN Connection: Select a WAN connection from the dropdown menu to use for the ping test Result: The results of the ping test will be displayed here. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 94: Log Configuration
Section 3 - Configuration Log Configuration The GO-DSL-AC750 keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. You can view the current log by clicking the View System Log button. -
Page 95: Status
Section 3 - Configuration Status Device Info This page displays the current information for the GO-DSL-AC750, such as LAN and wireless LAN information and statistics. System Info: This section displays a summary of the Sys- tem settings Internet Info: This section displays of the internet connec- tion settings. -
Page 96: Wireless Clients
Section 3 - Configuration Wireless Clients The wireless section allows you to view the wireless clients that are connected to your wireless networks. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 97: Dhcp Clients
Section 3 - Configuration DHCP Clients The DHCP Clients section allows you to view the clients that are connected to your router using DCHP. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 98: Logs
Section 3 - Configuration Logs The GO-DSL-AC750 keeps a running log of events and activities occurring on the router. If the device is rebooted, the logs will automatically be cleared. The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. -
Page 99: Statistics
Section 3 - Configuration Statistics The GO-DSL-AC750 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the router point is rebooted. -
Page 100: Route Info
Section 3 - Configuration Route Info The Route Info page displays a summary of the current route configuration between the router and the WAN. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 101: Help
Section 3 - Configuration Help This page provides help and explanations for different sections of the firmware. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 102: Connecting To Your Wireless Network
Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 103 WPS button on your router at the point to enable the WPS function. When you have established a successful connection a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 104: Windows® 7
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 105 TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 106 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 107: Wps
Section 4 - Connecting To Your Wireless Network The WPS feature of the GO-DSL-AC750 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. - Page 108 Section 4 - Connecting To Your Wireless Network 3. Double-click the GO-DSL-AC750. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 109 Section 4 - Connecting To Your Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 110 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 111: Windows Vista
If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 112: Wpa/Wpa2
(lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 113 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 114: Wps/Wcn 2.0
Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 115: Windows® Xp
If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 116: Wpa/Wpa2
1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 117 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 118: Troubleshooting
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. - Page 119 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
- Page 120 Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 121 • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 122: Wireless Security
Appendix A - Wireless Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The GO-DSL-AC750 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •... -
Page 123: Networking Basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. -
Page 124: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.1.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link Wireless AC Dual-Band ADSL Router User Manual... -
Page 125: Link'n Print
D-Link Link’n Print allows you to share USB devices such as external storage drives and multifunction printers with other users across your network by simply connecting the device to select D-Link routers. This allows you to use an external storage drive or printer located across your network as if it were connected to your local PC. - Page 126 1. Right-click on the Windows System Tray icon. 2. Click on Open D-Link Link’n Print. 3. The D-Link Link’n Print displays the connected USB devices on the network. To click “Connect” to have the USB device connected. 4. Advanced Options can be set by clicking on Advanced Options.
- Page 127 3. Insert the CD-ROM of the multifunction printer and follow the instructions to install the multifunction printer’s driver. When the installation process prompts you to connect the multifunction printer to your PC, click Next. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 128 Appendix C - Link ‘n Print 4. The D-Link Link’n Print virtually connects to this multifunction printer. Click Next 5. Choose the printer driver that you want D-Link Link’n Print to auto-connect when you print. D-Link Wireless AC Dual-Band ADSL Router User Manual...
- Page 129 Appendix C - Link ‘n Print When You Want to Scan Move the cursor to Available for Use and click on Scan Now. D-Link Wireless AC Dual-Band ADSL Router User Manual...
-
Page 130: Technical Specifications
• Cable or DSL modem • Microsoft Internet Explorer 6 or higher, Firefox 1.0 or higher, Safari 1.2 or higher, • Subscription with an Internet Service Provider (ISP) or other Java-enabled browser D-Link Wireless AC Dual-Band ADSL Router User Manual... - Page 131 • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 65 °C (-4 to 149 °F) Humidity • 5 % to 95 % non-condensing Certifications • CE • Wi-Fi Protected Setup (WPS) • Wi-Fi D-Link Wireless AC Dual-Band ADSL Router User Manual...