Table of Contents
Advertisement
Section 3 - Configuration
Enable IP Filter:
Check to enable or disable the IPv4 Filter.
Security Level:
Select the security level.
Low will set the filter to Black in both direc-
tions.
Middle will set the filter to White in the WAN
-> LAN direction and White in the LAN->
WAN direction.
High will set the filter to White in both direc-
tions.
Filter Model:
Select the filter model to adjust and click
Add a Rule to reveal further options.
Enable:
Check to enable or disable the IPv4 model.
Connection:
Select the connection to be filtered.
Protocol:
Select the appropriate protocol for the con-
nection.
Source IP:
Enter the sending IP address to be filtered.
Source Mask:
Enter the sending mask to be filtered.
Source Port:
Enter the sending port to be filtered.
Destination IP:
Enter the destination IP address to be fil-
tered.
Destination Mask:
Enter the destination mask to be filtered.
Destination Port:
Enter the destination port to be filtered.
Description:
Enter a name for the filter rule.
D-Link Wireless AC Dual-Band ADSL Router User Manual
IPv4 Filtering
53
Advertisement
Table of Contents
