Local Ipv6 Network - D-Link GO-DSL-AC750 User Manual

Section 3 - Configuration
This section enables you to specify various IPv6 settings.
IPv6 Address:
Enable RADVD:
Enable DHCPv6 Server:
Lan Address Config Mode:
Start/End Interface ID:
DHCPv6 Lease Time:
DHCPv6 Valid Time:
IPv6 DNS Mode:
WAN Interface:
Primary DNS:
Secondary DNS:
Get Prefix Mode:
WAN Interface:
Site Prefix:
D-Link Wireless AC Dual-Band ADSL Router User Manual

Local IPv6 Network

Use this option to specify a static IPv6 Ad-
dress.
Enable or disable the Router Advertisement
Daemon
Enable or disable the DHCPv6 server func-
tion.
Select either stateless (host requests) or
stateful (server provisions) LAN IPv6 address-
ing.
Enter the range of IP addresses the DHCPv6
server can issue from.
The lease time determines the period that
the host retains the assigned IP addresses
before the IP addresses change.
Specify the period for which an assigned IPv6
address remains valid.
Allow the router to accept the first received
IPv6 DNS assignment from a WAN connec-
tion. Alternatively, you can manually enter
the IP addresses for primary and secondary
IPv6 DNS servers.
Specify the WAN interface to be used.
Enter an address for a preferred DNS Server.
Enter an address for an alternate DNS Server.
Use this option to specify whether IPv6 Prefix
delegation is assigned manually or via a WAN
interface.
Specify the WAN interface to be used. for IPv6
prefix delegation.
Manually assign an IPv6 prefix delegation.
29