Table of Contents
Advertisement
Section 3 - Configuration
This section enables you to configure a 3G Internet connection.
Click the Add button to reveal the setup options.
Enable 3G Service
Account:
Password:
Dial Number:
Net Type:
APN:
On Demand:
Inactivity Timeout:
Backup delay time:
Recovery delay time:
Initialization Delay time:
Mode Switch Delay
time:
Backup Mechanism:
Checking IP address:
Timeout:
Period time:
Fail Tolerance:
D-Link Wireless AC Dual-Band ADSL Router User Manual
3G WAN Configuration
Check to enable or disable 3G functionality.
Enter your 3G Account username.
Enter your 3G Account password.
Enter the number to be dialed.
Select your 3G network access type.
Enter the Access Point Network if there is
one.
Check to connect to 3G network automati-
cally or manually.
Enter a period to disconnect an inactive con-
nection.
The response time allowed for 3G connection
before a dial-up is initiated.
Specify a period to re-dial.
Specify a period for the 3G connection to
initialize.
Specify a period to allow for a mode switch.
Select a WAN connection to use if 3G fails.
Specify an IP Address to test the 3G connec-
tion.
Specify a period of inactivity after which an
established 3G session will be ended. Set to
zero or choose Auto in Reconnect Mode to
disable this feature.
Specify a period for DSL or Ethernet uplink to
be disconnected.
Specify the number of failures before using
the backup connection.
48
Advertisement
Table of Contents
