5.1.4 Replacing the Glass Gasket and/or the Glass
It is a good idea to replace the glass gasket when the door gasket is replaced. The gasket is flat,
adhesive-backed, woven fibreglass.
To replace the glass, follow these steps:
1. Remove the door from its hinges and lay it on a flat and soft surface.
2. Unscrew and remove the top glass retainer (A) and the bottom glass retainer (B) held in place
by 10x screws (C).
3. Remove the glass (D) and the silver nameplate (E).
Repete the steps in reversa to install the new glass.
27
Destination 1.6 Installation and Operation Manual