Setting Up Do Not Disturb - AVM FRITZ!Box 7360 Installation, Configuration And Operation

Setting Up Do Not Disturb

•
Setting Up a New Call Block
1.
2.
3.
4.
5.
6.
This concludes the configuration of the call block.
12.7 Setting Up Do Not Disturb
In the FRITZ!Box night service you can set up a do not disturb
function so that none of the connected telephones and other
terminal devices signal calls. At a time freely defined by the
user (for instance 11:00 p.m. – 6:00 a.m.) the terminal devic-
es then will be set as follows:
•
•
Block telephone numbers for incoming calls:
If you block a number for incoming calls, the FRITZ!Box
will no longer accept any calls from this telephone num-
ber—provided that the caller did not suppress her or his
number. In this way you can block connections from un-
wanted callers.
You can also set up a call block for all callers who do not
transmit their telephone numbers (anonymous callers).
Open the FRITZ!Box user interface (see
Select the "Telephony / Call Blocks" menu.
Click the "New Blocking Rule" button.
Select whether the call block is to apply to incoming or
outgoing calls.
Enter a range of numbers or a number.
Save the settings by clicking "OK".
Connected telephones will not ring.
This is not the case for IP telephones. It is not possible to
set up do not disturb for IP telephones in the FRITZ!Box.
Connected fax and answering machines are disabled.
The do not disturb setting has no effect on fax reception
or the answering machines integrated in the FRITZ!Box.
78
page 31).