AVM FRITZ!Box 7360 Installation, Configuration And Operation page 29

Connecting Computers Wirelessly via WLAN
WLAN devices are generally delivered with their own WLAN
software, which is installed in the computer along with the
WLAN device. By now many operating systems have WLAN
software included. Integrated WLAN devices sometimes use
the operating system's WLAN software.
Installing a WLAN Device
If you need to use a separate WLAN device because you do
not have one integrated, then install the WLAN device in the
computer along with the corresponding WLAN software.
Please take note of the instructions in the documentation of
the device.
Transferring WLAN Security Settings
The values for WLAN security preconfigured in the FRITZ!Box
have to be transferred to the WLAN device by entering the val-
ues in the WLAN software.
If you would like to establish a WLAN connection using the
preset values, then your WLAN device must support the WPA
encryption procedure.
1.
2.
3.
Now your WLAN device and the FRITZ!Box are connected with
each other wirelessly.
Start the WLAN software.
Enter the following values for the connection between
the FRITZ!Box and the WLAN device:
SSID (name of the
WLAN radio net-
work)
Encryption method
Encryption
WLAN key
Network mode
Confirm your entries using the relevant button in the us-
er interface (for instance, "OK" or "Connect").
29
FRITZ!Box 7360
WPA (TKIP) or WPA2 (AES-CCMP)
WPA PSK or WPA2 PSK (AES)
The key is printed on the sticker at-
tached to the bottom of the housing.
Infrastructure