Preriding Checks - MV Agusta F4 BRUTALE Use And Maintenance Manual

4.8.

Preriding checks

WARNING
A motorcycle can be in good running
order and then become unexpectedly
unreliable even if unused (e.g. deflation
of the tyres). It is therefore important to
carry out the checks described in the
table below before each ride. A few
moments taken to carry out these checks
will help you maintain your motorcycle
safe and in perfect working order.
Brakes
Check fluid level (§6.7).
Check for fluid leakage.
Pull lever and press pedal to check brake operation.
Lubricate the lever joint, if necessary.
Check pads for wear (§6.6).
Gear lever
Press pedal to check gear operation.
Lubricate the lever joint, if necessary.
Clutch lever
Check fluid level (§6.8).
Check for fluid leakage.
OPERATION
Pull lever and check that it moves smoothly and gradually.
Lubricate the lever joint, if necessary.
Engine start button / stop switch
Check operation (§3.4).
Throttle twist grip
Check that grip rotates smoothly and returns to closed
position when released.
Steering system
Verify that the operation is smooth and uniform.
Check for play and loosening.
Lights, visual and acoustic signals
Check operation.
Tyres
Check inflating pressure and wear (§6.9).
Suspensions
Verify that the operation is smooth and uniform.
Check adjustment (§5.6 and 5.7).
Frame fasteners
Check tightening of all screws and nuts.
Tighten them, if necessary.
Drive chain
Check adjustment and lubrication (§6.10).
Coolant
Check level (§6.5).
Check for leakage.
- 77 -
4
4