MV Agusta F4 BRUTALE Use And Maintenance Manual page 144

Safety switch
CAUTION
Make sure to always keep clean the contact areas between the following components, as
shown in the above figures:
6
• Side stand and safety switch
• Clutch lever and clutch master cylinder piston
• Front brake lever and front brake master cylinder piston
Clean these areas every 500 ÷ 1000 km, as prescribed in the Scheduled Maintenance Table. In
any case, we suggest to verify the cleanliness of the above areas every time you use the vehi-
cle, in order to maintain the related parts in good working order.
MAINTENANCE
Clutch master
Sidestand
Clutch lever
cylinder piston
- 142 -
6
Front brake master cylinder piston
Front brake
lever