MV Agusta F4 BRUTALE Use And Maintenance Manual page 121

Rear wheel disassembling
CAUTION
If you have the rear wheel tyre
replaced by a tyre-dealer, make
sure that the following tools are
used in the rear wheel disassem-
bling and reassembling:
• 55 mm polygonal
wrench
• Torque wrench
If the above mentioned opera-
tions are performed with tools
other than those indicated, the
rear wheel parts can be seriously
damaged. Therefore, we strongly
recommend not to have the tyres
replaced by an improperly equip-
ped workshop. Always have the
tyres replaced by an authorized
MV Agusta dealer.
MAINTENANCE
Polygonal nut
socket
Wheel pin with M50x1.5 mm
left-hand pitch tread
55 mm polygonal socket wrench
Torque wrench
- 119 -
6
6