Tables Of Scheduled Maintenance And Checks - MV Agusta F3 800 Maintenance Manual

1
MAINTENANCE

1.2. Tables of scheduled maintenance and checks

1
The main periodic checks and maintenance operations are
shown in the following tables. These operations are necessary
to keep the motorcycle safe and in perfect running order.
The intervals indicated in the periodic maintenance and lubri-
cation tables must be intended as a general guide under nor-
mal riding conditions. It could be necessary to reduce these
intervals according to the climate, the ground conditions, the
geographic position and the conditions of use.
Some of the operations can be carried out by the user, provid-
ing he or she possesses the requisite skills. If unskilled, have
the operations performed by an authorized service centre.
As a rule maintenance operations must be performed while
the motorcycle is on the rear stand after switching off the
engine and setting the start switch to OFF. On the contrary,
while checking the fluid levels it is advisable to keep the motor-
cycle in an upright position without using the rear stand.
After the first 36,000 km (22,400 mi) the operations must be
performed at the same intervals shown in the tables.
- 4 -