Chain Sharpening - Ozito OZPCS305A Instruction Manual

MAINTENANCE (cont.)

Chain sharpening

Sharpen the chain regularly to maintain optimum
performance of the saw. Signs of a dull chain are:
• The sawdust becomes powder-like
• Extra force is required to execute a cut
• The cut does not track in a straight line
• Increased vibration
• Increased fuel consumption
Warning! Wear heavy gloves when handling the chain. Hold the guide bar (14)
securely in a vice.
Sharpen each cutter using a chain file. Always use outward strokes. After sharpening,
the cutters must all have the same width and length.
After every 3-4 times use an authourised repair centre to professionally sharpen your
saw chain. They have the special tools necessary to ensure the correct cutting angles
and depths.
Guide bar wear
Reverse the guide bar (14) every 8 working hours to ensure uniform wear. Check the bar
rails frequently and if necessary remove burs and square-up the rails using a flat file.
Note: The chainsaw warranty does not cover components that have been subjected
to operator abuse or negligence. To receive full value from the warranty, the operator
must maintain the chainsaw as instructed in this manual.
Ozito Industries will not be responsible for any damage or injuries caused by repair of
the tool by an unauthorised person or mishandling or mistreatment of the tool. This
tool is designed for Domestic Home Use only - use in commercial or industrial
environments will void the warranty.
outward
stroke
21