Ozito PXCCSS-018 Instruction Manual

Ozito PXCCSS-018 Instruction Manual

Cordless chainsaw
Hide thumbs Also See for PXCCSS-018:

Advertisement

CORDLESS
CHAINSAW
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Bar Length:
250mm (10")
Cutting Length Max.: 230mm
Chain Speed:
4.3m/s
Chain Pitch:
9.53mm (3/8")
Chain Gauge:
1.1mm (.043")
Oil Tank Capacity:
200ml
Weight:
3.0kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: guide bar, chain
and included accessories.
STANDARD EQUIPMENT
10
in
250
mm
40
3/8" LP
Chainsaw
Guide Bar Cover
Screwdriver
PXCCSS-018
0718

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXCCSS-018 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXCCSS-018

  • Page 1 Oil Tank Capacity: 200ml Weight: 3.0kg ozito.com.au PXCCSS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    ACCESSORIES 15 Guide Bar Cover 16 Screwdriver BATTERY & CHARGER This tool is compatible with all battery and chargers from the Ozito Power X Change Range. ONLINE MANUAL Scan this QR Code with your mobile device to take you to the...
  • Page 3: Operation

    OPERATION 2. OIL 3. SWITCHING ON/OFF Switching ON IMPORTANT: ONLY USE OIL THAT IS EXPRESSLY LABELLED 1. Pull the hand guard/chain brake “CHAIN BAR OIL”. towards you. 1. Remove the chain bar oil cap. 2. Fill the tank with chain bar oil. The capacity of the chain oil tank is 220ml.
  • Page 4: Chain Brake

    5. CUTTING 4. CHAIN BRAKE The chain brake operates automatically in the event of kick back. CAUTION: FIRST TIME USERS SHOULD, AS A MINIMUM PRACTISE, CUT LOGS ON A SAW-HORSE OR CRADLE The chainsaw is fitted with a hand guard/chain brake which when operated brings the chain to a stop within a tenth of a second.
  • Page 5 CAUTION: FIRST AVOID CUTTING THE GROUND AS THIS WILL VERY QUICKLY DULL THE SAW CHAIN. PXCCSS-018...
  • Page 6: Maintenance

    TROUBLESHOOTING MAINTENANCE Cleaning and storing WARNING: BEFORE CLEANING YOUR CHAINSAW OR CARRYING OUT ANY MAINTENANCE PROCEDURE, • Keep the handles free of grease so that you can maintain a firm grip. MAKE SURE THE BATTERY REMOVED TO PREVENT • Clean the device as required with a damp cloth and, if necessary, mild washing up ACCIDENTAL STARTING.
  • Page 7: Spare Parts

    Chain Replacement: YOUR BATTERY CHARGER. The chain can be purchased through Ozito spare parts or from your local Bunnings Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product Warehouse. The correct chain can be purchased by matching the pitch, gauge and using the battery pack.
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 9: Warranty

    Ø23mm Suits chain pitch: 0.325” and 3/8” Weight: 1.7kg ozito.com.au PXCCSSS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 10 This tool is compatible with all battery and chargers from to be sharpened. the Ozito Power X Change Range The tool can also be clamped to mounting surface ONLINE MANUAL with a G-clamp or similar.
  • Page 11 2. SETTING OF THE SHARPENER Note: Prior to using the sharpener, several adjustments must be made in order to 4. If you do not know the angle of the chain, set the sharpen the teeth of the chain effectively. table angle to 35°. 1.
  • Page 12 Adjusting the depth of cut Adjusting the chain (tooth) stop 1. Ensure the chain is still locked in place, the chain 1. With the chain clamped in position, rotate stop still flipped into position and the chain stop the chain stop in behind the chain tooth adjustment knobs still secured.
  • Page 13: Inserting And Removing The Battery

    OPERATION 3. INSERTING & REMOVING THE BATTERY 4. OPERATION Installing a Battery into the Sharpener Prior to operation, ensure you have read and understood the operating instructions. Ensure you wear safety gear 1. Align the ribs of the battery with such as eye protection.
  • Page 14 OPERATION Note: The sharpening process consists of two operations. These are, setting to the left, and Movement of the chain through then setting the right. It is suggested that you sharpen all of the teeth that face one the chain clamp (sliding guide) should side (every second tooth) and then proceed to sharpen all the teeth on the opposite be from the HANGING chain as shown.
  • Page 15: Wheel Change

    4. Hold the wheel with one hand and using Note: Ozito Industries will not be responsible for any damage or injuries caused by the free hand turn the knob at the centre repair of the tool by an unauthorised person or mishandling or mistreatment of the of the wheel anti clockwise.
  • Page 16 Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock.
  • Page 17: Battery Safety Warnings

    Save these instructions and other documents supplied with this tool for future reference. DESCRIPTION OF SYMBOLS Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated therefore no earth wire is required.
  • Page 18 Australia 1800 069 486 tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range New Zealand 0508 069 486 available through your local Bunnings Warehouse. Product availability may differ.
  • Page 19: 2 Electrical Safety

    Save these instructions and other documents supplied with this tool for future reference. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. DESCRIPTION OF SYMBOLS This tools charger is double insulated therefore no earth wire is required.
  • Page 20: Charging A Battery

    The correct dimensions for drill holes can be found on the back of the charging unit; a on the tool. template for the mounting hole locations can also be found on the Ozito website. • If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.

Table of Contents

Save PDF