Chain Brake And Lubrication; Fuel; Chain Brake/Anti Kickback Guard; Automatic Oil Feed System - Ozito PCS-406A Instruction Manual

Petrol chainsaw
Table of Contents

Advertisement

4. CHAIN BRAKE & LUBRICATION

Chain brake/anti kickback guard

The chain brake operates automatically in the event of kick back. Kick
back occurs if the chain catches on the wood being cut. In the event of the
chain catching, the chainsaw will push back suddenly, when this happens,
your hand (which is on the handle during operation) will naturally move
forward automatically causing the guard to be pushed forward, engaging
the chain brake and stopping the chain.
START
BRAKE ON
Lubrication
RUN
CAUTION!:
ONLY USE OIL THAT IS EXPRESSLY
LABELLED "CHAIN BAR OIL"
BRAKE OFF
1. Remove chain bar oil cap and fill
the tank to about 80% of its capacity
with chain bar oil.
Chain Bar Oil Tank Capacity: 210ml

Automatic oil feed system

The chainsaw is equipped with an
automatic oil feed system. This
delivers oil to the bar and chain.
Run the engine at medium speed
and check that the chain splatters a
thin line of oil which can be seen on
the ground/material when the bar is
pointed downwards. This may take
15-30 seconds to occur.
Note. The oil outlet must be kept clear of dirt and any build-up of residue.
WARNING!:
NEVER START WORK UNLESS THE
CHAIN AND BAR ARE LUBRICATED
START
BRAKE ON
RUN
BRAKE OFF
2. Fasten the chain bar oil cap
and clean any oil spillage.

5. FUEL

WARNING!:
PETROL IS VERY FLAMMABLE. DO NOT
SMOKING OR CAUSING ANY SPARKS OR FLAMES
NEAR FUEL. MAKE SURE THAT YOU STOP THE MOTOR
AND ALLOW IT TO COOL BEFORE REFUELLING THE
CHAINSAW. SELECT AN OPEN OUTDOOR AREA FOR
FUELLING AND MOVE AT LEAST 3M AWAY FROM THE
FUELLING POINT BEFORE STARTING THE MOTOR.
Motor fuel: mix at 40:1 only
Note. Only use oil that is expressly
labelled for use with air-cooled 2-stroke
engines.
Note. Always transport and store fuels in
an approved container (AS2906).
1. Fill with unleaded petrol up to fuel line.
2. Add 2-stroke oil up to oil line. Shake
vigorously for a thorough mix.
3. Fill the fuel tank up to the filler neck
with the fuel mix.
Fuel tank capacity: 260ml
4. Fasten the fuel tank cap and clean any
spillage.
585ml
Regular
585ml
Unleaded
Regular
Unleaded

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents