Seat Belt Pretensioner Removal - Lexus 2005 IS300 User Manual

4 Clips
2005 LEXUS IS300 (RM1140U)
BODY - SEAT BELT PRETENSIONER
SEAT BELT PRETENSIONER
REMOVAL
NOTICE:
F
If the wiring connector of the seat belt pretensioner is
disconnected with the ignition switch at ON or ACC,
diagnostic trouble codes will be recorded.
F
Never use seat belt pretensioner from another ve-
hicle. When replacing parts, replace them with new
parts.
1. REMOVE FRONT DOOR INSIDE SCUFF PLATE
Using a screwdriver, remove the front door inside scuff plate.
HINT:
Tape the screwdriver tip before use.
H15717
2. REMOVE REAR DOOR INSIDE SCUFF PLATE
Using a screwdriver, remove the rear door inside scuff plate.
HINT:
Tape the screwdriver tip before use.
3. REMOVE REAR PART OF FRONT DOOR OPENING
TRIM
4. REMOVE FRONT PART OF REAR DOOR OPENING
TRIM
H15726
5. REMOVE CENTER PILLAR LOWER GARNISH
Remove the center pillar lower garnish as shown in the illustra-
tion.
H15727
6. REMOVE FRONT SEAT OUTER BELT
(a) Using a screwdriver, remove the shoulder anchor cover.
HINT:
Tape the screwdriver tip before use.
(b) Remove the bolt and shoulder anchor.
(c) Using a screwdriver, remove the floor anchor cover.
HINT:
Tape the screwdriver tip before use.
(d) Remove the bolt and floor anchor.
H15728
Author : Date :
BO-217
BO2DG-05
2454