Seat Belt Pretensioner - Lexus IS300 2005 Manual

IN-16
Example:
2005 LEXUS IS300 (RM1140U)
INTRODUCTION
NEVER USE OHMMETER ON AN AIRBAG OR PRETENSIONER
- FOR ALL OF VEHICLES
(h)

SEAT BELT PRETENSIONER

(1) Never measure the resistance of the seat belt pre-
tensioner. This may cause the seat belt pretension-
er to activate, which could cause serious injury.
(2) Never disassemble the seat belt pretensioner.
(3) Never install the seat belt pretensioner in another
vehicle.
(4) Store the seat belt pretensioner where the ambient
temperature remains below 80°C (176°F), has low
humidity and is away from electrical noise.
(5) Before using an electric welder, first disconnect the
connector (the connector is yellow and has 2 pins).
(6) As a safety measure, always activate the seat belt
pretensioner before disposal (see page
Activate the pretensioner in safe place away from
electrical noise.
(7) The seat belt pretensioner becomes hot after ac-
tivation. Allow it to cool before disposing. Never use
water to cool seat belt pretensioner.
Author :
BO-220
B02121
Date :
16
).