Back Door Glass Installation - Lexus 2005 IS300 User Manual

BO-122
Adhesive
Spacer
Primer M
Primer M
Adhesive
2005 LEXUS IS300 (RM1140U)
BODY - BACK DOOR GLASS
INSTALLATION
1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
(a) Using a knife, cut away any rough areas on the body.
HINT:
Leave as much of the adhesive on the body as possible.
(b) Clean the cutting surface of the adhesive with a piece of
shop rag soaked with cleaner.
BO4420
2. REPLACE SPACER
(a) Remove the damaged spacers.
(b) Cut off the old adhesive around the spacers installation
area.
NOTICE:
Be careful not to damage the body.
(c) Clean the installation area.
(d) Attach the new spacers to the glass with the ceramic
notch on the glass aligned with the spacers as shown in
H19019
the illustration.
3. POSITION GLASS
(a) Place the glass in the correct position.
(b) Check that all contacting part of the glass rim are perfectly
even.
(c) Place reference marks between the glass and body.
(d) Remove the glass.
H19021
4. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface which is black-col-
ored area around the entire glass rim.
NOTICE:
Do not touch the glass face after cleaning it.
BO4421
5. COAT CONTACT SURFACE OF BODY WITH PRIMER
"M"
Using a brush, coat Primer M to the exposed part of body on the
vehicle side.
NOTICE:
F
Let the primer coating dry for 3 minutes or more.
F
Do not coat Primer M to the adhesive.
F
Do not keep any of the opened Primer M for later use.
H02865
Author : Date :
BO4DR-02
2359