CH-8
SST (C)
SST (B)
2005 LEXUS IS300 (RM1140U)
CHARGING
Turn
Z00040
Turn
SST (A)
P10836
Wire
Clip
B01648
SST
B02021
-
GENERATOR
(c)
Mount SST (C) in a vise.
(d)
Insert SST (B) into SST (C), and attach the pulley nut to
SST (C).
(e)
To loosen the pulley nut, turn SST (A) in the direction
shown in the illustration.
NOTICE:
To prevent damage to the rotor shaft, do not loosen the
pulley nut more than one-half of a turn.
(f)
Remove the generator from SST (C).
(g)
Turn SST (B), and remove SST (A and B).
(h)
Remove the pulley nut and pulley.
5.
REMOVE RECTIFIER END FRAME
(a)
Remove the 4 nuts and wire clip.
(b)
Using SST, remove the rectifier end frame.
SST
09950- 40011 (09951- 04020, 09952- 04010,
09953-04030, 09954-04010, 09955-04041)
(c)
Remove the generator washer.
6.
REMOVE ROTOR FROM DRIVE END FRAME
Author :
Date :
1546