O/D Direct Clutch Speed Sensor On-Vehicle Repair - Lexus 2005 IS300 User Manual

AT-8
2005 LEXUS IS300 (RM1140U)
AUTOMATIC TRANSMISSION
O/D DIRECT CLUTCH SPEED
SENSOR
ON-VEHICLE REPAIR
1.
2.
3.
4.
5.
(a)
(b)
6.
(a)
D09364
(b)
7.
8.
9.
- O/D DIRECT CLUTCH SPEED SENSOR
REMOVE NO. 1 AND NO. 2 ENGINE UNDER COVERS
REMOVE LH FRONT FLOOR CENTER COVER
REMOVE NO. 1 REAR FLOOR BOARD
DISCONNECT O/D DIRECT CLUTCH SPEED SENSOR
CONNECTOR
REMOVE O/D DIRECT CLUTCH SPEED SENSOR
Remove the bolt and O/D direct clutch speed sensor.
Remove the O-ring from the O/D direct clutch speed sen-
sor.
INSTALL O/D DIRECT CLUTCH SPEED SENSOR
Coat a new O-ring with ATF and install it to the O/D direct
clutch speed sensor.
Install the O/D direct clutch speed sensor to the transmis-
sion case and torque the bolt.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
INSTALL NO. 1 REAR FLOOR BOARD
INSTALL LH FRONT FLOOR CENTER COVER
INSTALL NO. 1 AND NO. 2 ENGINE UNDER COVERS
Author :
AT0XW-01
Date :
1630