Lexus 2005 IS300 User Manual page 826

EM-58
Case Clamp
New Clamp
2005 LEXUS IS300 (RM1140U)
ENGINE MECHANICAL -
14. INSTALL NO. 3 TIMING BELT COVER
Torque: 8.0 N·m (80 kgf·cm, 71 in.·lbf)
15. INSTALL VACUUM CONTROL VALVE SET AND NO. 2
VACUUM PIPE
(a) Install the vacuum control valve set and No. 2 vacuum
pipe with the 3 nuts.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
(b) Install the engine wire clamp to the clamp bracket of the
No. 2 vacuum pipe.
(c) Connect the VSV connector for the ACIS.
16. INSTALL AIR INTAKE CHAMBER (See page
A02735
17. INSTALL OIL DIPSTICK AND GUIDE FOR A/T (See
page
18. INSTALL OIL DIPSTICK AND GUIDE FOR ENGINE
(See page
19. INSTALL THROTTLE BODY AND INTAKE AIR CON-
NECTOR ASSEMBLY (See page
20. INSTALL WATER BYPASS OUTLET AND NO. 1 WA-
TER BYPASS PIPE (See page
21. INSTALL EXHAUST MANIFOLD
(a) Install 2 new gaskets to the cylinder head.
(b) Using a 14 mm deep socket wrench, install the exhaust
manifold with the 8 nuts. Uniformly tighten the nuts in sev-
eral passes.
Torque: 40 N·m (410 kgf·cm, 30 ft·lbf)
(c) Connect the 3 heated oxygen sensor connectors and
clamp.
A09752
(d) Install a new clamp and the case clamp as shown in the
illustration.
A11121
CYLINDER HEAD
EM-71 )
LU-12 )
Author :
SF-49
EM-5 )
CO-14 )
Date :
1323
)