Extension Housing Oil Seal On-Vehicle Repair - Lexus 2005 IS300 User Manual

SST
2005 LEXUS IS300 (RM1140U)
AUTOMATIC TRANSMISSION
EXTENSION HOUSING OIL SEAL
ON-VEHICLE REPAIR
1.
2.
3.
4.
5.
6.
Using SST, remove the oil seal.
SST
D05052
7.
(a)
NOTICE:
Clean the extension housing before removing the oil seal.
(b)
8.
9.
OR0005
10.
11.
12.
13.
- EXTENSION HOUSING OIL SEAL
REMOVE NO. 1 AND NO. 2 ENGINE UNDER COVERS
REMOVE LH FRONT FLOOR CENTER COVER
REMOVE NO. 1 REAR FLOOR BOARD
REMOVE EXHAUST PIPE ASSEMBLY
(See page EM-100 )
REMOVE PROPELLER SHAFT (See page
REMOVE REAR OIL SEAL
SST 09308-00010
INSTALL NEW OIL SEAL
Using SST and a hammer, carefully drive a new oil seal
in as far as it will go.
SST 09325-20010
Coat the lip of a new oil seal with MP grease.
INSTALL PROPELLER SHAFT (See page
INSTALL EXHAUST PIPE ASSEMBLY
(See page EM-100 )
FILL ATF AND CHECK FLUID LEVEL
(See page DI-338 )
REMOVE NO. 1 REAR FLOOR BOARD
REMOVE LH FRONT FLOOR CENTER COVER
INSTALL NO. 1 AND NO. 2 ENGINE UNDER COVERS
Author :
AT-3
AT0HE-02
PR-4 )
PR-10 )
Date :
1625