Motorola CS4070 Manual page 197

Modifier Characters (Continued)
Table D-4
Code Type Option Value
PDF417, 0
Micro PDF417
1
2
3
4
5
Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is
transmitted as ]L2ABCD.
Data Matrix 0
1
2
3
4
5
6
MaxiCode 0
1
2
3
Reader set to conform to protocol defined in 1994 PDF417
symbology specifications. Note: When this option is transmitted,
the receiver cannot reliably determine whether ECIs have been
invoked or whether data byte 92
transmission.
Reader set to follow the ECI protocol (Extended Channel
Interpretation). All data characters 92
Reader set for Basic Channel operation (no escape character
transmission protocol). Data characters 92
Note: When decoders are set to this mode, unbuffered Macro
symbols and symbols requiring the decoder to convey ECI escape
sequences cannot be transmitted.
The bar code contains a GS1-128 symbol, and the first codeword
is 903-907, 912, 914, 915.
The bar code contains a GS1-128 symbol, and the first codeword
is in the range 908-909.
The bar code contains a GS1-128 symbol, and the first codeword
is in the range 910-911.
ECC 000-140, not supported.
ECC 200.
ECC 200, FNC1 in first or fifth position.
ECC 200, FNC1 in second or sixth position.
ECC 200, ECI protocol implemented.
ECC 200, FNC1 in first or fifth position, ECI protocol implemented.
ECC 200, FNC1 in second or sixth position, ECI protocol
implemented.
Symbol in Mode 4 or 5.
Symbol in Mode 2 or 3.
Symbol in Mode 4 or 5, ECI protocol implemented.
Symbol in Mode 2 or 3, ECI protocol implemented in secondary
message.
Programming Reference
Option
has been doubled in
DEC
are doubled.
DEC
are not doubled.
DEC
D - 9