Motorola CS4070 Manual page 27

Config.ini File Content (Continued)
Table 1-1
Parameter
TimeFormat 12h
24h
ScanParam Variable
Sleep Integer
BTSleep Integer
ButtonPlus Enable
Disable
ButtonMinus Enable
Disable
ButtonBT Enable
Disable
WakeUpLED Enable
Disable
LEDBlue Enable
Disable
LEDGreen Enable
Disable
LEDRed Enable
Disable
LEDAmber Enable
Disable
CodeID Enable
Disable
ScanLED Enable
Disable
AutoReconnect Enable
Disable
Values
Time format for batch data. Set to enable
. See
time stamp
set the time.
Enter no value to disable the time stamp,
for example: "
Any scan engine parameter. Multiple
entries are allowed. Sent after reset or
when engine is powered.
For example:
ScanParam=0xf0,0x00,0x01
ScanParam=0xee,0x01
ScanParam=0x38,0x00
Time in seconds before the scanner enters
sleep mode when no activity is detected.
Time in seconds before the scanner enters
sleep mode while paired to another
Bluetooth device when no activity is
detected.
Enable or disable the Plus button.
Enable or disable the Minus button.
Enable or disable the BT button.
Enable or disable the wake-up LEDs.
Enable or disable the blue LED for normal
operation and wake up.
Enable or disable the green LED for
normal operation and wake up.
Enable or disable the red LED for normal
operation and wake up.
Enable or disable the amber LED for
normal operation and wake up.
Enable or disable saving CodeID in the
scanned bar codes file. See
IDs on page
Enable or disable the LEDs that illuminate
while the scanner is active.
Enable or disable automatic Bluetooth
reconnection to dongle or another device.
Description
Set Time on page 3-5
"
TimeFormat =
Code Type
D-1.
Getting Started 1 - 9
Default
24h
to (Enable)
<none>
0
0
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Disable