Matrix 2 Of 5; Enable/Disable Matrix 2 Of 5 - Motorola CS4070 Manual

Matrix 2 of 5

Enable/Disable Matrix 2 of 5

Parameter # 618
To enable or disable Matrix 2 of 5, scan the appropriate bar code below.
Enable Matrix 2 of 5
Set Lengths for Matrix 2 of 5
Parameter # 619, 620
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths
within a specific range. The default is 4 to 55.
•
One Discrete Length - Select this option to decode only Matrix 2 of 5 symbols containing a selected
length. Select the length using the numeric bar codes in
to decode only Matrix 2 of 5 symbols with 14 characters, scan Matrix 2 of 5 - One Discrete Length, then
scan 1 followed by 4. To correct an error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Matrix 2 of 5 symbols containing either of
two selected lengths. Select lengths using the numeric bar codes in
For example, to decode only Matrix 2 of 5 symbols containing either 2 or 14 characters, select Matrix 2
of 5 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan
•
Length Within Range - Select this option to decode a Matrix 2 of 5 symbol with a specific length
range. Select lengths using the numeric bar codes in
to decode Matrix 2 of 5 symbols containing between 4 and 12 characters, first scan Matrix 2 of 5 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To
correct an error or change the selection, scan
•
Any Length - Scan this option to decode Matrix 2 of 5 symbols containing any number of characters
within the scanner's capability.
(1)
Cancel on page F-3.
*
Disable Matrix 2 of 5
(0)
Appendix F, Numeric Bar
Appendix F, Numeric Bar
Appendix F, Numeric Bar Codes.
Cancel on page F-3.
Symbologies 4 - 59
Codes. For example,
Cancel on page F-3.
Codes.
For example,