Pioneer LD-V4400 Level I User Manual page 14

Chapter One • LD-V4400 Level I & III
Level I — Manual Control
In Level I, the player is controlled by using Remote Control Buttons on the RU-V103, by
scanning Standard LaserBarcodes, or by using the Front Panel Buttons. Manual Control
(Level I) allows simple control of the videodisc player using such commands as Play, Stop,
Still, Step Forward, etc.
LEVEL
LD-V4400 Videodisc Player
1
•
Remote Control Units
The optional remote control
unit, RU-V103, can be used
for Manual Control of the
LD-V4400. It sends an
infrared signal to the player's
remote sensor, or it sends
signals via a wired connection
to the LaserBarcode Terminal
on the front of the player.
OPEN /CLOSE
Opens and closes disc drawer.
DISPLAY
Turns on-screen display ON / OFF. (Also
used with Power-ON button to set On-Screen
Function Switches.)
POWER ON/OFF
Powers the player ON / OFF.
PLAY
Spins-up & plays videodisc.
STILL/STEP
Forward & Reverse
Holds a still frame on CAV, Pauses on CLV,
and steps forward or back one frame at a time.
SCAN
Forward & Reverse
Moves rapidly forward or backward through
video material on a disc.
For information about using the Front Panel Buttons, the Remote Control Unit
(RU-V103) or a Barcode Reader (UC-V108BC or UC-V109BC) for Manual Control
1-4
wired
connection
Infrared signal
•
7 8 9
4 5 6
3
1 2
0
RU-V103
LD-V4400D Front Panel Buttons
OPEN / CLOSE
DISPLAY
POWER ON / OFF
PAL/NTSC Select
Selects video format, if no disc is loaded.
(Level I Control) of the LD-V4400, see Chapter 3.
TP 116 v1.1 • 9/93
Remote Sensor
LaserBarcode Terminal
See
Front Panel Buttons
• described below
•
A Pioneer Barcode Reader,
UC-V108BC or UC-V109BC,
can be used to send an infrared
signal to the LD-V4400 via the
remote sensor. It can also send
a signal via a wired connection
through the Barcode Terminal
on the front of the player.
UC-V108BC
•
LD-V4400 Level I & III User's Manual
Barcode Reader
UC-V109BC
PLAY
STILL / STEP
Forward & Reverse
SCAN
Forward & Reverse
LD-ROM SELECT
Figure 1-B