Pioneer LD-V4400 Level I User Manual page 124

LaserBarcode Standard Commands & LaserBarcode Logo
5. Creating Barcodes
Pioneer New Media Technologies, Inc. sells barcode preparation software packages for
creating standard LaserBarcodes, extended LaserBarcode 2 or Barcode-CD barcodes.
Bar'n'Coder 3.0 is a Hypercard-based barcode creation and printing software for the
Macintosh. LaserDisc Controller v3.1 is barcode creation and printing software for MS-
DOS compatible machines. BarKoder for Windows v 2.0 is for use with a minimum
80386 IBM or compatible machine running MS DOS 5.0 and MS Windows 3.1 or above.
All barcode preparation software packages are available through authorized Pioneer New
Media Technologies, Inc. dealers.
Standard LD-V2000
LaserBarcode Yes
Original Commands.
† ‡ ††
†
LaserBarcode2 No
Original & Extended
Commands † ‡ ††
Barcode CD No
† ‡ ††
* LD-V8000 players with serial numbers greater than KJ3906076 (after December '91) have built-in LaserBarcode capability.
**LD-V8000 players with serials numbers greater than ME3912276 (after May 1992) have built-in LaserBarcode 2 capability.
LD-V8000 players manufactured before May 1992 can be updated to LB2 by contacting Pioneer Electronics Service and ordering an
EPROM Replacement Kit. The LB2 Logo appears on players with serial numbers greater than MJ3914776 (after October 1992).
† UC-V104BC — This barcode scanner scans and transmits LB, LB2 original and extended commands, and Barcode CD
commands to the players that are compatible with these barcode formats. Use the UC-V104BC in mode 2, except use it in Mode 1
with the LD-V2000. See Product Information Bulletin #7 A . This is the only Pioneer barcode reader that works with the LD-V2000.
Control Cable: A stereo mini plug with a threaded screw-type connector goes to a jack on the reader; a mono mini plug goes to the
jack on the player. (Use DIN adapter to attach the control cable to IO port on the back of the LD-V2000.)
‡ UC-V108BC — The autoscanner scans and transmits LB, LB2 original and extended commands, and Barcode CD commands
to the players that are compatible with these barcode formats. See Product Information Bulletin #14 A . Control Cable: A mono
mini plug with a simple locking connector goes to a jack on the reader; a mono mini plug goes to the jack on the player.
†† UC-V109BC — This barcode scanner scans and transmits LB, LB2 original and extended commands, and Barcode CD
commands to the players that are compatible with these barcode formats. See Product Information Bulletin #15 . Control
Cable: A stereo mini plug goes to a jack on the reader; a stereo mini plug goes to the jack on the player.
NOTE: The LD-V2000 and the LD-V2200 are not LB2 compatible players. The LD-V4200
(discontinued) with LBA/15 and the LD-V6000/A and LD-V6010/A (discontinued) with
LBA/25 and the LC-V330 Autochanger with LBA/15 also are not LB2 compatible players.
D-10
TP 116 v1.1 • 9/93
Player Compatibility with Barcode Standards
LD-V2200 CLD-V2400
Yes Yes
† ‡ †† † ‡ ††
No Yes
† ‡ ††
No Yes
† ‡ ††
Appendix D LaserBarcode Standard Commands & Logo
LD-V4400 LD-V8000 LC-V330
Yes Yes* Yes
(With
LBA 15)
† ‡ †† † ‡ †† † ‡ ††
Yes Yes** No
† ‡ †† † ‡ ††
No No No
LD-V4200 LD-V6000
Discontinued Models
Yes Yes
With With
LBA 15 LBA 25
† ‡ †† † ‡ ††
No No
No No