Manual Control - Level I; Computer Control - Level; Chapter Highlights - Pioneer LD-V4400 Level I User Manual

Chapter One • LD-V4400 Level I & III

1.3 Chapter Highlights

This manual provides:
• An overview of player operating processes.
• How to customize player functions by using On-Screen Function Switches
and On-Screen Status Displays.
• Specific information about Manual and Computer control.
It is divided into chapters providing the following information:
Chapter One — Introduction
This chapter describes the scope and overview of the Pioneer LD-V4400
Level I and III User's Manual and explains how information is organized.
It also defines Level I, II, III as they relate to three different hardware
configurations, and illustrates Level I and III configurations for the
LD-V4400.
Chapter Two — Operational Basics
This chapter gives an overview of the player's internal operating processes,
describing Operating Modes and Active States, and the front panel indicators. It
also describes player interfaces: The infrared sensor, used to receive infrared
LaserBarcode and remote control signals; the LaserBarcode terminal, used to
receive wired LaserBarcode and remote control signals; and the RS-232C
serial interface.
There are also illustrations of the front and rear panels of the player that include
the external sync, the two video outputs and the two audio output channels.
There is a section describing the player's On-Screen Function Switches. As on
the LD-V8000, function switches of the LD-V4400 are set On-Screen, rather
than with DIP switches. On-Screen Status Displays are also described.
Chapter Three — Manual Control — Level I
This chapter describes the player's front panel buttons, the remote control
buttons on the RU-V103, and Pioneer Barcode Readers. All of these can be
used for Level I control of the LD-V4400.
Chapter Four — External Computer Control — Level III
This chapter explains how commands are sent to the LD-V4400 from an
external computer, what error messages may be returned, the default settings,
a basic list of Level III commands and descriptions of each command.
1-6 LD-V4400 Level I & III User's Manual
TP 116 v1.1 • 9/93