Player Indicators - Pioneer LD-V4400 Level I User Manual

When a REJECT command is received, the player enters Spin-down Mode. Image play-
back stops immediately, and disc rotation is gradually stopped, then the player enters
Park. The Figure 2-B, below, describes how the active states change within the player.
Transitions Between Active States
DOOR OPEN
RANDOM ACCESS
PLAY
Figure 2-B

2.2 Player Indicators

The LD-V4400 has seven indicator lights on the front panel. This section explains
these indicators. (See diagram of LD-V4400's Front Panel, Figure 2-C, on page 2-5.)
Power Indicator (red)
The Power Indicator lights up when the player power is turned on.
LD-ROM Indicator (green)
installed, this indicator does not light up. With the optional LD-ROM board
installed, this indicator blinks when the player is in LD ROM Mode. It stops
blinking and is not lit after the player terminates the LD-ROM mode.
Busy Indicator (green)
light blinks when the player enters LD-ROM mode, until it is ready to receive
SCSI commands. It also blinks during communications via SCSI and when
the player exits LD-ROM mode and returns to park. Without the optional
LD-ROM board installed, this light functions as an RS-232C indicator,
blinking when signals are transferred via RS-232C.
LD-V4400 Level I & III User's Manual
LD-V4400 Level I & III • Chapter Two
OPEN
CLOSE
SPIN-UP
STILL
MULTI-SPEED
— Without the optional LD-ROM board #UK-V112)
— With the optional LD-ROM board installed, this
TP 116
PARK
SPIN-DOWN
SCAN
PAUSE
SEARCH
v1.1 • 9/93
2-3