Pioneer LD-V4400 Level I User Manual page 44

LD-V4400 Level I & III • Chapter Three
3.1.4 SCAN FWD / REV
Function: Pressing this button makes the player scan forward or reverse rapidly.
Explanation: The player scans as long as this button is pressed and audio is
squelched during a scan. When the scan button is released, the player reverts to
the mode it was in before scanning.
Note: If the player is in the process of searching to a target address when the
SCAN button is pressed, the player continues and completes the search and ends
in a still frame. Audio is squelched during scanning. The scanning speed of the
player is about 40 times the normal speed.
3.1.5 DISPLAY
Function: During normal player operation, pressing this button turns ON or OFF
the on-screen display.
Explanation: The display may be toggled ON or OFF. If it is turned ON, the chapter,
frame or time numbers, and characters generated by the user will be displayed on the
monitor. The items displayed depend on the setting for Register A. The initial value of
Register A is 3. This allows the chapter, frame and time numbers to be displayed. For
more information on Register A, see page 4-39 of this manual. If the display is turned
OFF, the items indicated by Register A will not be displayed.
NOTE: The On-Screen Audio Status Display and Speed Status Display are not
affected by DISPLAY ON and OFF. These will continue to present information as
described in Section 2.5 Status Displays in Manual Mode, page 2-20, whether
DISPLAY is ON or OFF.
NOTE: The chapter, frame, and time numbers can be displayed only in Random
Access Mode. If the power is turned on while the DISPLAY button is pressed, the
player enters Function Switch Setting Mode. The player exits Function Switch Setting
Mode when the DISPLAY button is pressed again. See Section 2.4 On-Screen
Function Switches, page 2-12, for details about Function Switch Setting Mode.
3.1.6 LD-ROM SELECT
Function: This button functions only if the optional LD-ROM card #UK-V112 is
installed in the player. The LD-ROM card has four DIP Switches, accessible through a
small door located on the top of the player. If Switch #1 is Up/On, the player
automatically enters LD-ROM Mode when power is turned on and a disc is placed in
the tray. If Switch #1 is Down/Off, the LD-ROM button on the front of the player is
used to enable or disable LD-ROM Mode.
In LD-ROM Mode, the green LD-ROM indicator and the red BUSY indicator flash on
and off and the LD-ROM disc spins up automatically when the player's door is closed.
All of the front panel buttons except the OPEN/CLOSE button are locked. Also,
RS-232C computer control is locked out.
LD-V4400 Level I & III User's Manual 3-3
TP 116 v1.1 • 9/93