Setting The Camera Interrupt; Auxiliary Setting; Setting The Aux Mode; Apple Carplay Setting - Alpine iLX-700 Owner's Manual

Adjusting guides simultaneously
1
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display On/Off
Turning the selected guide off.
1
Touch [On/Off].
The currently selected guide will turn off.
2
To turn the guide on, touch [On/Off] again.
• Guides that are turned off are still adjustable.
Returning guides to default
1
Touch [Default].
A message window will appear.
2
Touch [OK].
Adjusted values will return to default settings.

Setting the Camera Interrupt

Even when the unit is powered off, the monitor will display the rear
view behind the vehicle when the gear lever is shifted to the reverse
position.
Setting item: Interrupt (Power OFF)
Setting contents: ON (Initial setting) / OFF
• Rear camera can only be operated to display the rear view.
• When the gear lever is shifted out of reverse, the unit turns off.

Auxiliary Setting

[Auxiliary (AUX)] is selected on the Application setup menu in step 3.
Refer to "Application Setup Operation" (page 26).

Setting the AUX Mode

Setting item: AUX In
Setting contents: OFF / ON (Initial setting)
OFF: AUX source and related setting items are not displayed.
ON: AUX source and related setting items are displayed.
• After turning on the "AUX In" , the following further items can be
adjusted.
Setting the Auxiliary Name
When AUX In is turned on, this setting is available.
Setting item: AUX Name
Setting contents: AUX (Initial setting) / DVB-T
Setting Direct Touch Operation
If DVB-T is set as the AUX Name, this setting is available.
Setting item: DirectTouch
Setting contents: On (Initial setting) / Off
On: Direct Touch operation is available on the DVB-T screen.
Off: Direct Touch operation is not available on the DVB-T
screen.
Switching the Visual Input Signal System
After turning on the "AUX In", this setting can be carried out. The video
input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.

Apple CarPlay Setting

[Apple CarPlay] is selected on the Application setup menu in step 3.
Refer to "Application Setup Operation" (page 26).

Steering wheel Setting

This setting influences Apple CarPlay mode.
Setting item: Steering wheel
Setting contents: Left (Initial setting) / Right

Setting the Siri Microphone Effect

You can turn on or off the Siri Microphone Effect.
Setting item: Microphone EC / NR
Setting contents: ON (Initial setting) / OFF

Selecting the Output Speaker

You can select which speaker in the car will output the audio from the
phone.
Setting item: Call Speaker Select
Setting contents: All (Initial setting) / Front L / Front R / Front LR
All: The sound is output from all speakers in car.
Front L: The sound is only output from the front left speaker.
Front R: The sound is only output from the front right speaker.
Front LR: The sound is output from the front left and front right
speakers.

Adjusting the Microphone Level

You can adjust the transmit volume.
Setting item: Microphone Level
Setting contents: 1 to 11 (Initial setting: 5)
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
27
-EN