Integrated high definition lcd television (77 pages)
Summary of Contents for Toshiba 40BV705B
“Register your TV online at: www.toshiba.co.uk/registration” 40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 1 40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 1 User Manual DIGITAL Series - 1 - 21.01.2012 17:57:09 21.01.2012 17:57:09...
Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see above to ﬁ nd out when your area switches to digital.
You must allow the television to complete the search. * This process may affect any saved information stored on your product. Please consult your instruction manual or contact the manufacturer using the details above. TOSHIBA Customer Helpline: 0844 856 0730 TOSHIBA Online Support: www.toshiba.co.uk/tv-dvd-support 40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 3 40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 3...
If your Freeview TV or box picks up a different regional service to your preferred service (e.g. BBC England instead of BBC Scotland, or ITV Central instead of ITV Anglia), you can use this manual re-tune If you are missing some services you may ﬁ...
4 ) Write down the “RF Channel” numbers for your transmitter using the Group boxes here: 5 ) Press MENU and use ◄ or ► to select Install and Retune. 6 ) Select Manual Channel Scan from the Installation menu and press OK. 7 ) Select Search Type as Digital by using ◄...
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip- ment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of proﬁ t, interruption of business, the loss of recorded data whether caused during normal opera- tion or misuse of the product.
Important safety information USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Headphone Warning Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through headphones, particularly for extended listening periods.
Important safety information (continued) • This set should only be connected to an 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other type of supply. • The socket outlet must be installed near the equipment and is easily accessible.
To display your LCD TV using a wall bracket Removing the pedestal stand (1) Carefully lay the front of the TV face down on a ﬂ at, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be taken when removing the pedestal stand to avoid damage to the LCD panel.
Simple at-a-glance reference of your remote control. Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. Aerial cable:... Connect the aerial to the ANT. socket on the rear of the television. SCART lead:... If you use a decoder* or a media recorder, it is essential that the scart cable is connected to the television.
Connecting an HDMI® or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant  consumer electronic...
• Plug your USB device to one of the USB inputs of the TV. SIDE VIEW NOTE: The USB socket has limited functionality, and Toshiba can take no responsibility for damage to other connected equipment. - 16 - USB MEMORY 21.01.2012 17:57:32...
• This television is designed to consume less energy to save environment. • You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efﬁ ciency feature of this TV. To reduce energy consumption, you should take the following steps: •...
A wide variety of external equipment can be connected via the sockets located on the side and back of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the left side of the television may be used for some functions. Switching on If the standby LED is unlit, check that the mains plug is con- nected to the power and press the...
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the ﬁ...
Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • Auto Tuning will completely retune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. Digital Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. • Select Manual Search from the Installation menu and press OK.
Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time posi- tions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. Stereo…...
Channel List, Sorting Programmes, Programme Locking You can view stored channels and sort them by using the Channel List feature. Viewing Channel List The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK.
Viewing Info Banner, Electronic Programme Guide Viewing Info Banner • Press INFO button the information screen will appear giving details of the channel and programme currently being viewed. • Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen.
Language Settings Using this menu you can adjust the preferred language settings. • Select Language from Setup menu and press OK to view this menu. Press the BACK button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. Viewing Parental Control Menu Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu.
Conﬁ guring Picture Settings You can conﬁ gure picture settings of your TV by using Picture Settings menu. Conﬁ guring Picture Settings You can use different picture settings in detail. You can customize current picture mode settings as desired. For example you change items such as, Brightness, Contrast, Colour, Sharpness and Hue.
Conﬁ guring Picture Settings - Advanced Settings Select Advanced Settings and press OK button to view or edit advanced picture settings: Colour Temp Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint. •...
Changing Picture Format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press SCREEN button and select Picture Zoom. Press OK repeatedly to select between Auto, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3, Panoramic or Cinema. When Auto is selected the format being displayed is determined by the picture being broadcast.
Conﬁ guring PC Picture Settings You can set PC Mode picture settings when using the TV as a PC monitor. PC Picture Settings (*) (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode.
Conﬁ guring Sound Settings You can conﬁ gure sound settings of your TV by using Sound Settings menu. Conﬁ guring Sound Settings Sound settings can be conﬁ gured according to your personal preferences. Press MENU button and select the Sound icon by using Left or Right button.
Settings Menu Operation, Conditional Access Conﬁ guring Your TV’s Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings icon by using Left or Right button. Press OK button to view Settings menu.
Setting Timers, Setting Date/Time • The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.
Source Settings, Other Controls Conﬁ guring Source Settings You can enables or disable selected source options. The TV will not switch to the disabled source options when SOURCE button is pressed. • Select Sources in the Settings menu and press OK button.
Blue Background Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK. Select Blue Background using Up or Down buttons and use Left or Right to set. If the signal is weak or absent, the TV will automatically change to a blue screen.
Other Controls - HDMI True Black While watching from HDMI source, this feature will be visible in the Picture Settings menu. Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK.
Do not use a USB Hub. • You must obtain any required permission from copyright owners to use copyright content. Toshiba cannot and does not grant such permission. • Depending on the ﬁ le size and amount in your USB storage device, it may take some time for loading to view.
USB Media Browser - This TV allows you to enjoy photo, video or music ﬁ les stored on a USB device. Viewing JPG Files To view photo ﬁ les from a USB disk, you can use this menu screen. When you select Photos from Media Browser, available image ﬁ...
USB Media Browser - This TV allows you to enjoy photo, video or music ﬁ les stored on a USB device. Video Playback When you select Videos from Media Browser, available video ﬁ les will be ﬁ ltered and listed on this screen.
• For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer. Below is a guide to the functions of the remote control text buttons. Acessing Sub-Pages If a text page has sub-pages, press and enter the sub- page numbers 01,02,03 etc.
Appendix A: PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.
Appendix C: Supported File Formats for USB Mode ﬁ le extension containers .mpg .mpeg .mpe .avi File Media Extension Video Music .mp3 Baseline JPEG Photo .jpg Progressive JPEG Appendix D: PIN Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
License Information • HDMI, the HDMI logo, and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. • DVB is a registered trademark of the DVB Project. •  EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-deﬁ...
Questions and Answers Questions Below are the answers to some of the most common queries. For more information, go to www.toshiba.co.uk Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections.
Questions Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk Why doesn't the Media Browser feature operate? Make sure that USB is connected correctly. Incorrect behaviour may occur with a USB Hub connection.
(1) year from the date of original purchase when brand new (“Warranty Period”). 3. If a failure or defect covered by the warranty arises and a valid claim is received by Toshiba within the Warranty Period, Toshiba shall at its option and to the extent permitted by law, repair or replace the machine or any components free of charge or refund the purchase price of the Product.