Learning About The Remote Control - Toshiba 40G30U Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are
described here. For a complete list of the remote
control's functions, see the remote control functional
key chart ( page 24).
Note: The error message "NOT AVAILABLE"
may appear if you press a key for a function
that is not available.
22
Chapter 3: Using the remote control
1 POWER turns the TV on and off. When the TV is
2 FREEZE freezes the picture. Press again to restore the
3 SLEEP accesses the sleep timer (  page 56).
4 PIC SIZE cycles through the picture sizes: Natural ,
5 Channel Numbers (0–9, –/100) directly tune channels.
6 INPUT selects the video input source (  page 35).
7 CH ST cycles through programmed channels when no
8 VOL + – adjusts the volume level.
9 FAV BROWSER accesses the Favorites List in the
10 RECALL displays TV status information (  page 58).
11 CH RTN returns to the last viewed channel or source
12 MUTE reduces or turns off the sound (  page 44).
13 INFO displays TV status information as well as program
14
15 Arrow buttons (STWX) When a menu is on-screen,
16 ENTER activates highlighted items in the main menu
17 MENU accesses the main TV menu system (  pages 28
18 EXIT closes on-screen menus.
19 MODE SELECT switch switches between TV, CABLE/
on, the green LED indicator on the TV front will be
illuminated.
moving picture (  page 42).
TheaterWide 1/2/3 , Full , 4:3 HD , Native and Dot by Dot
(  page 39-41).
button is used to tune digital channels (  page
The
39) or to edit the Favorites List (  page 36).
menu is on-screen (  page 31).
Channel Brower™ (  page 36).
(  page 39).
details, when available (  page 58).
/ While watching TV, these buttons open
the Channel Browser™ and tune to the previous/next
channel in the channel history (  page 36). (Also see
"Arrow buttons.")
these buttons select or adjust programming menus. (Also
see / .)
system.
and 29).
SAT, AUX 1, and AUX 2 modes (  page 23). Set to
"TV" to control the TV.