Adjusting The Picture Quality; Using The Closed Caption Mode; Base Closed Captions - Toshiba 40G30U Owner's Manual

Adjusting the picture quality

You can adjust the picture quality (Contrast,
Backlight, DynaLight™, Brightness, Color, Tint, and
Sharpness) to your personal preferences.
Pressing W
Selection
Contrast lower
Backlight* darker
DynaLight** On/Off
Brightness darker
Color paler
Tint reddish
Sharpness softer
* Backlight
This feature adjusts the brightness of the
entire screen. When in video mode and no
signal is input, this will automatically be set to
0. (Settings are stored in memory.)
** DynaLight
This function automatically strengthens the
black coloring of dark areas in the video
according to the level of darkness.
To adjust the picture quality:
1
and open the Picture menu.
Press
2
Highlight Picture Settings and press
3 Press S or T to select the picture quality you
want to adjust (Contrast, Backlight, DynaLight,
Brightness, Color, Tint, or Sharpness), and then
press W or X to adjust the setting, as described in
the table above.
4
To save the new settings, highlight Done and
press . You can use any of the picture modes
( "Selecting the picture mode," above left) as a
starting point for adjusting the picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight
Reset and press
.
The picture qualities you adjusted are automatically
saved in the Preference mode ( "Selecting the
picture mode," above left) until Reset is selected.
Chapter 6: Using the TV's features

Using the closed caption mode

Base closed captions

The closed caption mode has two options:
Captions—An on-screen display of the dialogue,
Pressing X
narration, and sound effects of TV programs and
videos that are closed captioned (usually marked
higher
"CC" in program guides).
lighter
Text—An on-screen display of information not
related to the current program, such as weather or
On/Off
stock data (when provided by individual stations).
lighter
To view captions or text:
deeper
1
greenish
sharper
2
To view captions:
Highlight CC1, CC2, CC3, or CC4. (CC1 displays
translation of the primary language in your area.)
.
To view text:
Highlight T1, T2, T3, or T4.
To turn off the closed caption mode:
Select Off in step 2 above.
Note: A closed caption signal may not display
in the following situations:
When a videotape has been dubbed
When the signal reception is weak
When the signal reception is non-standard
and open the Preferences menu,
Press
highlight Base CC Mode.
Press W or X to select the desired closed caption
mode and press .
Note: If the program or video you selected
is not closed captioned, no captions will
display on-screen.
Note: If text is not available in your area, a
black rectangle may appear on screen. If this
happens, set the Base CC Mode to Off.
(continued)
43