Using The Pc Settings Feature; Setting The Pc Audio - Toshiba 40G30U Owner's Manual

5 Press X to select On. When the control panel
is locked and any button on the control panel
(except POWER) is pressed, the message "NOT
AVAILABLE" appears.
To unlock the control panel:
Select Off in step 5 above, or press and hold the
VOLUME – button on the TV control panel for about
10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN
terminal, you can use the PC Settings feature to
make adjustments to the image. If the edges of the
picture are cut off, readjust the Horizontal Position
and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.
To adjust the PC settings:
1
Repeatedly press to select PC input mode
( "Selecting the video input source to view"
page 35).
2
and open the Setup menu.
Press
3
Highlight PC Settings and press
Note: If a PC is not connected or there is no
pc input signal, this feature will be grayed
out in the Setup menu.
4
Press S or T to highlight the item you want to
adjust.
5 Press W or X to make the appropriate
adjustments.
50
Chapter 6: Using the TV's features
Mode
Horizontal
Position
Vertical
Position
Clock
Phase
Sampling
Clock
Auto
Adjust
* The default settings may vary depending on

Setting the PC Audio

.
This function allows you to output or mute the sound
from your PC when connecting using the PC IN
terminal and an analog RGB cable. ( page 18)
To set the PC Audio:
1
2
3
Note: The screen is disrupted momentarily
when adjusting the PC settings. This is not a
sign of malfunction.
Description
Moves the picture left/right.
The adjustment range is within ±50 from
center.*
Moves the picture up/down.
The adjustment range is within ±10 from
center.*
Helps to reduce noise and sharpen the
picture.
The adjustment range is within ±16 from
center.*
Helps to reduce noise and minimize
periodic vertical stripes on the screen.
The adjustment range is within ±10 from
center.*
Highlight this item then press
to get an optimum adjustment
automatically.
the input signal format.
and open the Sound menu.
Press
Highlight Audio Setup and press
Press S or T to select PC Audio and then press
W or X to select No or Yes.
Yes: When viewing the PC input, the audio from
the PC Audio input can be heard.
No: When viewing the PC input, there will be no
audio.
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs,
the PC Audio menu setting influences the
HDMI 1 Audio menu setting. If PC Audio
.
(continued)