Using The Locks Menu; If You Cannot Remember Your Pin Code; Changing Your Pin Code; Entering The Pin Code - Toshiba 40G30U Owner's Manual

®
Using the Dolby Digital Dynamic
Range Control feature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing
you to switch from ATSC to analog broadcasts at the
same dynamic range.
To use the Dolby Digital Dynamic Range
Control:
1
and open the Sound menu.
Press
2
Highlight Audio Setup and press
3
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected,
the audio is output with minimal compression.
4
To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .
Note:
This item will be grayed out for NTSC signals,
Video, ColorStream, and PC inputs.
The Dolby Digital Dynamic Range Control will
function in relation to Optical Output Format
(PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, Input Lock, Front
(Control) Panel Lock, GameTimer, and New PIN
Code features. You can use these features after
entering the correct PIN code.

Entering the PIN code

1
and highlight the Locks menu icon.
Press
2 Press T, which displays the PIN code entry
screen.
The Lock System screen (below) appears if a
46
Chapter 6: Using the TV's features
.
If the wrong PIN code is entered, the message
"Incorrect PIN code, please try again!" appears.
Highlight Retry and press
and press
When the correct PIN code is entered, the Locks menu
opens.
Note:
PIN code can not be set to "0000".

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press
be cleared and you can enter a new PIN code.

Changing your PIN code

1
2
3
4
5
6
Note:
PIN code can not be set to "0000".

Blocking TV programs and movies

by rating (V-Chip)

Some TV programs and movies include signals that
classify the content of the program (violence, sex,
PIN code has not been stored. Press the Channel
Number buttons to enter a new four-digit code,
enter the code a second time to confirm, and
press .
The Locks/Active screen appears if the PIN code
is already stored. Use the Number buttons to
enter your four-digit code and press
. Enter the code again
.
four times within five seconds. The PIN code will
and highlight the Locks menu icon.
Press
Press T to display the PIN code entering screen.
Enter your four-digit PIN code and press
Press T to highlight New PIN Code and press
Press the Number buttons to enter a new four-
digit code. Reenter the PIN code to confirm it.
Press . The new PIN code is now active.
.
.
.
(continued)