Connecting A Home Network - Toshiba 40G30U Owner's Manual

Note:
The PC audio input terminals on the TV are shared
with the HDMI-1 analog audio input terminals (
page 50).
Some PC models cannot be connected to this TV.
An adapter is not needed for computers with a
compatible mini D-sub15-pin terminal.
Depending on the DVD's title and the
specifications of the PC on which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
Signal names for mini D-sub 15-pin connector
Pin Signal Pin Signal
No. name No. name
1 R 6 Ground
2 G 7 Ground
3 B 8 Ground
4 Reserved 9 5V
5 Reserved 10 Ground
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analog
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog
cables are not necessary ( page 16).
TV back panel
Computer
The HDMI input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p
(60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 66.
Chapter 2: Connecting your TV
Note:

Connecting a home network

The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA server and play/display them on your TV. For
Pin Signal
supported formats, see page 53.
No. name
11 Reserved Note:
12 SDA
13 H-sync
14 V-sync
15 SCL
PC audio
cable
PC audio
output
The edges of the images may be hidden.
If receiving a 480i (HDMI), 480p (HDMI), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (i.e. no overscanning).
The TV's home network connection allows
access to file sharing only. You will NOT be
able to use the TV to access the Internet.
If you use a hub or switch to connect the
TV to your home network, you may not be
able to use the automatic setup and have to
manually set up the network address. See
page 55.
If you use a router with built-in DHCP
functionality, use the automatic setup.
Manual setup may not work.
If you connect the TV and PC directly, use
Ethernet crossover cable.
19