Tenda D301 User Manual page 27

Select Use the following Static IPv6 DNS address and manually enter the DNS server address. If you have two
4.
DNS server addresses, enter the second also.
Click Next -> Apply/Save.
5.
_________________________________________________________________________________________________
Note:
If "Obtain an IP address automatically" is chosen, DHCP will be enabled for PVC in IPoE mode.
_________________________________________________________________________________________________
Here you can configure the NAT settings. If you are unsure about the options, please keep the default settings and then
click Next.
Here you can configure the WAN gateway address. Default gateway interface list can have multiple WAN interfaces
served as system default gateways but only one will be used according to the priority with the first being the higest and
the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and
- 27 -
Wireless Modem Router User Guide