Select IPoE.
1.
Edit the Enter Service Description. This field is optional. We recommend that you keep the default.
2.
Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack).
3.
Click Next.
4.
_________________________________________________________________________________________________
Note:
If you select IPv6 or IPv4 & IPv6 (dual stack), skip to
_________________________________________________________________________________________________
Obtain an IP address automatically: This allows the router to automatically acquire IP information from your ISP
or your existing networking equipment.
Use the following Static IP address: This allows you to specify the Static IP information provided by your ISP or
that corresponds with your existing networking equipment.
WAN IP Address: The Internet IP address provided by your ISP for accessing Internet.
WAN Subnet Mask: The subnet mask address provided by your ISP for accessing Internet.
WAN gateway IP Address: The gateway IP address provided by your ISP for accessing Internet.
.
IPv6
- 25 -
Wireless Modem Router User Guide