Tenda D301 User Manual page 36

PPP over Ethernet (PPPoE)
Click Advanced Setup -> WAN Service -> Add, select the configured interface and then click Next to enter the
following screen.
Select PPPoE.
1.
Edit the Enter Service Description. This field is optional. We recommend that you keep the default.
2.
Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack).
3.
Click Next.
4.
_________________________________________________________________________________________________
Note:
If you select IPv6 or IPv4 & IPv6 (dual stack), skip to IPv6.
_________________________________________________________________________________________________
PPP User Name: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide

it.
PPP Password: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide

it.
PPPoE Service Name: This information is provided by your ISP. Only enter it if instructed by your ISP.

Authentication Method: This is used by ISP to authenticate the client that attempts to connect. If you are not sure,

consult your ISP or select Auto.
- 36 -
Wireless Modem Router User Guide