Yamaha F50F Service Manual page 276

TRBL
SHTG
Hardware requirements
Make sure that your computer meets the following requirements before using this software.
Computer:
Operating system:
CPU:
Windows 95/98:
Windows Me/2000: Pentium, 166 MHz or higher (Pentium 233 MHz or higher recommended)
Windows XP:
Memory:
Windows 95/98:
Windows Me:
Windows 2000:
Windows XP:
Hard disk free space:
Drive:
Display:
Mouse:
Communication port:
Printer:
NOTE:
• The amount of memory and the amount of free space on the hard disk differs depending on the
computer.
• Using this software while there is not enough free space on the hard disk could cause errors and
result in insufficient memory.
• This software will not run properly on some computers.
• When starting up this program, do not start other software applications.
• Do not use the screen saver function or the energy saving feature when using this program.
• If the ECM is changed, restart the program.
• Windows XP is a multiuser operating system, therefore, be sure to end this program if the login
user is changed.
• The USB adapter cannot be used with Windows 95.
For operating instructions of the Yamaha Diagnostic System, refer to the "Yamaha Diagnostic Sys-
tem Instruction Manual."
9-3
Troubleshooting
IBM-compatible computer
Microsoft Windows 95, Windows 98, Windows Me, Windows 2000, or Win-
dows XP (English version)
i486X, 100 MHz or higher (Pentium 100 MHz or higher recommended)
Pentium, 300 MHz or higher (Pentium 500 MHz or higher recommended)
16 MB or more (32 MB or more recommended)
32 MB or more (64 MB or more recommended)
64 MB or more (128 MB or more recommended)
128 MB or more (256 MB or more recommended)
20 MB or more (40 MB or more recommended)
CD-ROM drive
×
VGA (640 480 pixels), (SVGA [800
256 or more colors
Compatible with the operating systems mentioned above
RS232C (Dsub-9 pin) port, USB port
Compatible with the operating systems mentioned above
×
600 pixels] or more recommended)
6C13G11