Assembling The Vapor Separator - Yamaha F50F Service Manual

Float height b:
46.6 ± 1.0 mm (1.83 ± 0.04 in)
2. Adjust the lever c of the float by bending
it until the float height d is within specifi-
cation.
NOTE:
When adjusting the float height, do not bend
the lever e.
Float height d:
35.0 ± 1.0 mm (1.38 ± 0.04 in)

Assembling the vapor separator

1. Install the float chamber.
2. Install all parts removed during dissas-
embly.
NOTE:
Be sure to connect and route the hoses cor-
rectly.
6C13G11
Vapor separator
1
2
3
4
5
6
7
8
9
4-20