Sony HVR-Z7J Service Manual page 413

Type Camcorder
D
Component video cable
3
(supplied)
4
A/V connecting cable
(supplied)
b Notes
• When you only connect a component video cable, audio signals are not outputted. An A/V connecting
cable is also needed to output audio signals. Connect the white and red plugs of the A/V connecting cable
to the audio input jack of your TV.
E
2
i.LINK cable (optional)
b Notes
• The TV needs to be set so that it recognizes that the camcorder is connected. Refer to the instruction
manuals supplied with your TV.
• This camcorder has a 6-pin i.LINK terminal. Select a cable that fits the terminal on the TV to be attached.
* Change the settings according to the TV connected.
Cable
(Green) Y
(Blue) P /C
B B
(Red) P /C
R R
(White)
(Red)
(Yellow)
: Signal flow, ( ): Reference pages
TV Menu Setting
(IN/OUT REC)
[VCR HDV/DV]
t[AUTO] (83)
[VIDEO OUT]
t[COMPONENT]
t[1080i/576i] (85)
[VIDEO OUT]
t[DOWN CONVERT]
t[SQUEEZE]/
[LETTER BOX]/[EDGE
CROP]* (85)
(IN/OUT REC)
[VCR HDV/DV] t
[AUTO] (83)
[i.LINK SET] t [HDV
t DV CONV] t [ON]
(86)
Continued ,
61