Sony HVR-Z7J Service Manual page 201

2. Modification of Camera Control Page Data
If the camera control page data has been initialized, change the
data of the "Fixed data-2" address shown in the following table by
manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If 2-digit page is selected, set higher-order digit to page: 0,
address: 10 as data, and then select lower-order digit by a usual
method.
e.g.: Set data: 06 to page: 0, address: 10, and then select page:
D. Thus, the page 6D can be selected.
After the modification of data finished, return the data on page:
0, address: 10 to "00".
3) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the cam-
corder may not operate.
4) When changing the data, press the PAUSE button of the ad-
justment remote commander each time when setting new data
to write the data in the non-volatile memory.
5) If all areas were initialized, check that the data at the addresses
for adjustment are initial values (adjustment initial values)
listed in the table. If different, change them to the adjustment
initial values.
Processing after Completing Modification Camera Control
Data:
Order Page Address Data
1 0 10
2 2 00
3 2 01
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
Procedure
00
29
29 Press PAUSE button.
3. 6D Page table
Note 1: If reading/writing data on pages 6D, set data: 06 to page:
0, address: 10, and then select pages: D. By this data
setting, the pages 6D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to "00".
Note 2: Fixed data-1: Initialized data. (Refer to "1. Initializing
the Camera Control Data")
Fixed data-2: Modified data. (Refer to "2. Modification
of Camera Control Data")
Initial value
Address
NTSC PAL
00 to 3F
40 B0 B0
41 00 00
42 60 60
43 00 00
44 48 48
45 00 00
46 0B 0B
47 40 40
48 03 03
49 4A 4A
4A 01 01
4B B6 B6
4C to 59
5A 00 00
5B
5C 35 35
5D 00 00
5E 0B 0B
5F 86 86
60 to AF
B0 04 04
B1 00 00
B2 00 00
B3 00 00
B4 00 00
B5 00 00
B6 00 00
B7 00 00
B8 04 04
B9 00 00
BA 00 00
BB 00 00
BC 00 00
BD 00 00
BE 00 00
BF 00 00
C0 04 04
C1 00 00
C2 04 04
C3 00 00
6-17
Remark
Fixed data-1 (Initialized data)
Iris control adj.
Iris position adj.
Fixed data-1 (Initialized data)
STD gain adj.
Fixed data-1 (Initialized data)
LV Standard data input
STD gain adj.
Fixed data-1 (Initialized data)
Linear matrix adj.