Sony HVR-Z7J Service Manual page 390

Changing the settings of your camcorder recordings (Continued)
COLOR CORRCT (Continued)
Item
[MEM1 COLOR]
[MEM1 REVISN]
[MEM2 COLOR]
[MEM2 REVISN]
WB SHIFT
To set items for the white balance shift.
Item
[FILTER TYPE]
[LB[COL TEMP]]
[CC[MG/GR]]
[R GAIN]
[B GAIN]
38
Description and settings
Sets colors stored in Memory 1.
[PHASE] : Sets color phase.
[RANGE] : Sets color phase range.
[SATURATION] : Sets saturation.
[ONE PUSH SET]: Automatically sets [PHASE] for a subject at the
Corrects colors in Memory 1.
[R GAIN] : Corrects the redness of the color in Memory 1. Tone of
cyan becomes higher as the redness decreases.
-15 (less reddish) to +15 (more reddish)
0 for no correction
[B GAIN] : Corrects the blueness of the color in Memory 1. Tone
of yellow becomes higher as the blueness decreases.
-15 (less bluish) to +15 (more bluish)
0 for no correction
Sets colors stored in Memory 2.
See [MEM1 COLOR] for description and settings.
Corrects colors in Memory 2.
See [MEM1 REVISN] for description and settings.
Description and settings
Selects a color filter type for the white balance shift.
[LB-CC] : Film type (color conversion and correction)
[R-B] : Video type (correction of R and B levels)
Sets a color temperature offset value.
-9 (bluish) to +9 (reddish)
Sets a color correct offset value.
-9 (greenish) to +9 (magentish)
Sets an R level.
-9 (low R level) to +9 (high R level)
Sets a B level.
-9 (low B level) to +9 (high B level)
0 (purple) t 8 (red) t 16 (yellow) t
24 (green) t 31 (blue)
0 (no color selection), 1 (narrow: to select only a
single color) to 31 (wide: to select multiple colors
in similar color phase)
0 (to select from light colors to dark colors) to 31
(to select dark color)
center of the marker. [SATURATION] is set to 0.