Sony HVR-Z7J Service Manual page 400

Using the Shot transition (Continued)
• If you press the following buttons during the
shot transition operation, the operation will be
canceled:
– PICTURE PROFILE
– MENU
– STATUS CHECK
– EXPANDED FOCUS
• You can also make a transition from the SHOT-
A to the SHOT-B or from the SHOT-B to the
SHOT-A. For example, to make a transition
from the SHOT-A to the SHOT-B, display the
shot transition check screen, press the A button
to bring up the SHOT-A and press the REC
START/STOP button. Then, display the shot
transition execution screen and press the B
button.
• You can rehearse the shot transition by pressing
the respective buttons (A or B) to which your
customized settings are assigned before pressing
the REC START/STOP button in step 6.
• The settings stored in the memory (SHOT-A/
SHOT-B) are cleared when you remove the Carl
Zeiss lens, or you adjust the flange focal length.
To cancel the operation
Press the SHOT TRANSITION/FOCUS
MARKING button C repeatedly to exit
the shot transition screen.
48