Pages; I60 Wind Operation - Raymarine i60 Installation And Operation Instructions Manual

Wind instrument
Table of Contents

Advertisement

7.1 Pages

The pages available depend on the display variant and are
shown in the table below:
i60 Wind
Wind speed
*Beaufort wind speed
*Maximum wind speed
*Maximum true wind speed alarm
*Low true wind speed alarm
*High apparent wind angle alarm
*Low apparent wind angle alarm
VMG
Tack
Note: *These pages are temporary pages and will time-out to
the previous permanent page after 8 seconds of inactivity.
Changing pages
During normal operation:
1. Press either the Power button to cycle through the pages.
2. Press the VMG button to display VMG information.
3. Press the Tack button to display tack information.
36
i60 Close hauled wind
Wind speed
*Maximum wind speed
VMG
Tack

7.2 i60 Wind operation

When connected to a relevant rotavecta or wind vane transducer
the i60 provides:
• True and apparent wind direction and speed. Wind speed is
displayed either in knots, meters per second or as Beaufort
scale values.
• Velocity made good (VMG) information, when vessel speed
information is available on the network.
• Tack angle, when heading information is available on the
network.
• Maximum wind speed.
• High and low true wind speed alarms.
• High and low apparent wind angle alarms.
Note: Alarms are only available on the i60 Wind instrument,
when set as a master unit. No alarms are available on the i60
Close hauled wind instrument.
i60 display information
The i60 instrument's display consists of an analogue pointer
and digital display.
Analogue display
The analogue display pointer shows either true or apparent wind
direction (Depending on setting).
Digital display
The digital display LCD shows the following wind information.
• Beaufort wind speed
• True / apparent wind speed
• Velocity made good (VMG)
• Tack heading
• Maximum wind speed
• Wind alarm data
Using the display (Power) button
Display
Display
Display
During normal operation:
1. Use the Display button to cycle through the available pages.
2. Press and hold the Tack buttons for 3 seconds to reset the
maximum wind speed to the current wind speed.
Note: All pages except for the Current wind speed page are
temporary and will time-out after 8 seconds.
Display
Display
60 5
55
50
3
10
45
15
T
ack
40
20
35
25
30
Display
Display
D12552-1
i60

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E70061E70062

Table of Contents