Controls; Power - Raymarine i60 Installation And Operation Instructions Manual

6.1 Controls

1
1
2
3
4
30
4
2 3
Display (Power) — Power the
instrument display on and off, adjust
backlight and contrast levels.
True / App — Switch between true
and apparent wind direction.
VMG — Display Velocity made
good.
Tack — Tack heading.

6.2 Power

Powering on the unit
With power to the unit turned on but the unit switched off:
1. Press and hold the Power button until the unit powers on and
data is displayed (approximately 2 seconds).
Note: When power to the unit is turned on the unit will switch
on automatically.
Powering off the unit
1. Press and hold the Power button until the power count down
timer is displayed and reaches zero (approximately 6 to 8
seconds).
Calibration alert
If the CAL legend on the digital display flashes for the first
D12375-1
30 seconds after power up, refer to the Calibration section to
calibrate your unit.
i60